K10 K20 K30 Pure Tungsten Rod With Good Wear And Bending Resistance
K10 K20 K30 Tungsten Carbide Rod With Good Wear And Bending Resistance
Tungsten carbide rod is mainly made of WC tungsten carbide and cobalt alloy powder by metallurgically mix, crush, ball mill, press and sinter. The main components are WC and Co. Tunsten carbide and Co contents in tungsten carbide rod for different purposes are different and have a wide range of applications. In a large range, cemented carbide has both good hardness and toughness, so it has become the most widely applicable hard material and is widely used in engineering and tool products.
Processing of tungsten carbide rod
- Cemented carbide may be damaged or deficient due to impact or excessive processing load.
- During processing, please confirm that the product has been firmly fixed on the installation platform without looseness before operation.
- Cemented carbide is not impact resistant. Do not use metal hammer.
- Cemented carbide is not easy to be adsorbed on magnet. When using magnet (magnet), please confirm that the product has been firmly fixed before operation.
- The machined surface after grinding and grinding is extremely smooth and the edges and corners are very sharp. Please pay full attention when taking processed products.
Specifications Table of tungsten carbide rod
| WC bar / rod | Diameter | Length | ||
| Type | Size (mm) | Tolerance (mm) | Size (mm) | Tolerance (mm) |
| JX040-50 | 4 | +0.2～0.4 | 50 | 1 |
| JX050-50 | 5 | +0.2～0.4 | 50 | 1 |
| JX060-50 | 6 | +0.2～0.4 | 50 | 1 |
| JX060-60 | 6 | +0.2～0.4 | 60 | 1 |
| JX080-60 | 8 | +0.2～0.4 | 60 | 1 |
| JX100-75 | 10 | +0.2～0.4 | 75 | 1.5 |
| JX100-100 | 10 | +0.2～0.4 | 100 | 2 |
| JX120-75 | 12 | +0.2～0.4 | 75 | 1.5 |
| JX120-100 | 12 | +0.2～0.4 | 100 | 2 |
| JX140-100 | 14 | +0.3～0.5 | 100 | 2 |
| JX160-100 | 16 | +0.3～0.5 | 100 | 2 |
| JX200-100 | 20 | +0.3～0.5 | 100 | 2 |
Application of tungsten carbide rod
Tungsten carbide rod is mainly used to make various metal and non-metal cutting tools, such as PCB micro drill, drill bit, end mill, reamer, etc. it is used to process aluminum alloy, stainless steel, heat-resistant alloy steel, nodular cast iron, nickel base and titanium alloy, non-ferrous metal and other products. Tungsten steel bars are also widely used in stamping tools and wear-resistant tools, such as plug-ins of various shapes, silicon
steel sheets and cold-rolled plates, punches, thimbles and punching needles of stainless steel.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.