W90Cu10 Copper Tungsten Alloy Products Round Bars Flat Bar Wire
W90Cu10 Copper Tungsten Round Bars Tungsten Copper Flat Bar Wire
Copper Tungsten Round Bars is Mainly used for EDM machining of carbide molds, high-speed steel and switches and contacts in high and low voltage electrical devices.
Copper Tungsten Round Bars information:
Material: W50-90Cu10-50
Brand:W55Cu45,W60Cu40,W70Cu30, W75Cu25, W80Cu20, W85Cu15, W90Cu10
Density: 11.85g/cm3-16.75g/cm3
Product standard: GB8320-87
WCu alloy rods size: dia(3.0-200mm)*L
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu Flatness tolerance:<4um
WCuRoughness:Ra1.6-Ra0.8
WCuSurface: polished, ground.
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size see following attachment
Advantages of Copper Tungsten Round Bars
1. Better heat resistant;
2. Better ablate-resistant;
3. High intensity
4. High density;
5. Excellent thermal and electrical conductivity;
6. Easy to be machined.
Copper Tungsten Round Bars Picture:
![]()
![]()
| Code No. | Chemical Composition % | Mechanical properties | ||||||
| CU | Impurity | W | Density (g/cm3 ) |
Hardness HB |
RES (cm) |
Conductivity IACS/ % |
TRS/ Mpa |
|
| CuW50 | 50+/-2.0 | 0.5 | Balance | 11.85 | 115 | 3.2 | 54 | |
| CuW55 | 45+/-2.0 | 0.5 | Balance | 12.3 | 125 | 3.5 | 49 | |
| CuW60 | 40+/-2.0 | 0.5 | Balance | 12.75 | 140 | 3.7 | 47 | |
| CuW65 | 35+/-2.0 | 0.5 | Balance | 13.3 | 155 | 3.9 | 44 | |
| CuW70 | 30+/-2.0 | 0.5 | Balance | 13.8 | 175 | 4.1 | 42 | 790 |
| CuW75 | 25+/-2.0 | 0.5 | Balance | 14.5 | 195 | 4.5 | 38 | 885 |
| CuW80 | 20+/-2.0 | 0.5 | Balance | 15.15 | 220 | 5 | 34 | 980 |
| CuW85 | 15+/-2.0 | 0.5 | Balance | 15.9 | 240 | 5.7 | 30 | 1080 |
| CuW90 | 10+/-2.0 | 0.5 | Balance | 16.75 | 260 | 6.5 | 27 | 1160 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.