New Tungsten Copper Alloy Wcu90/10 Tungsten Copper EDM Electrode, Heat Sink

Top grade W50-W90% wolfram tungsten copper alloy

(WCu 85/15 80/20 75/25) tungsten copper rods.

Material: W50-90 Cu10-50
Density: 11.85g/cm3-16.75g/cm3
Product standard: GB8320-87
WCu alloy rods size: diameter(3-100mm)*L<500mm
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm

WCu tungsten copper alloy application
-1. Arcing contacts and vaccum contacts in high and medium voltage breakers or vaccum interruptors;
-2. Electrodes in electric spark erosion cutting machines;
-3. Electrodes for resistance welding;used where the combination of high heat resistance, high electrical
Tungsten high heavy aloy
- Material: W90-97NiFe(Magnetic) & W90-97NiCu(Nonmagnetic)
- Density:16.8-18.8g/cm3
- Rods Size:dia(1.5 -200) x Length<500mm
Plate size: 0.1min Thickness*W*L

Tungsten Copper EDM Electrode Picture:

1. Tungsten copper alloy rod Specification:
Material: W50-90Cu10-50
Density: 11.85g/cm3-16.75g/cm3
Product standard: GB8320-87
WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mm
WCu alloy sheet size: diameter(3-100mm)*L<500mm

2. Pure tungsten/molybdenum rod surface finish:
Black: surface is as swaged or as drawn, retaining a ciating of processing lubricants and oxides.
Cleaned: Surface is chemically cleaned to removed all lubricants and oxides.
Ground: Surface is centerless to ground to remove all coating and to achieve precise diameter control.