Utility Vehicles 3rd Brake Light Camera , Rear View Camera From FIAT Ducato
LEADSIGN Third Brake Light Rear View Camera for utility vehicles from FIAT Ducato, Peugeot Boxer, Citroen Jumper
LEADSIGN‘s rear view camera LDS-TBC-FIAT replaces the original third brake light of your FIAT Ducato, CITROEN Jumper or Peugeot Boxer.
Of course, you don‘t have to do without the third brake light. An LED brake light is integrated in the LEADSIGN camera module, for simple “Plug & Play“ retrofit connecting to the specific OE vehicle connector.
An integrated microphone and an IR-LED night illumination system are part of the LDS-TBC-FIAT cam as well.
This product is compatible with a wide variety of 2-DIN A/V receivers of the aftermarket and the LEADSIGN CarPlay product line up, including LEADSIGN's 2-DIN Receivers.
Key Features:
- Compact, high-resolution rear view camera for FIAT Ducato, CITROEN Jumper and Peugeot Boxer vehicles
- Easy “Plug & Play“ installation
- Integrated microphone
- LDR controlled day / night mode with 9 night vision IR-LEDs
- Manual adjustment of vertical image section in 3 steps
- Separable 3-part system cable, with cable lengths of 0.7 m + 10 m +0.7 m
Technical Specifications:
| Image device | 1/3“ CMOS PC1058 Sensor |
| TV system | NTSC / PAL |
| View angle | 170° (D) x 120° (H) x 85° (V) |
| Native sensor resolution | 600 TV lines |
| Light sensitivity | 0.1 Lux, 0 Lux if IR on |
| Video output | 1.0 Vp-p, 75 ohms CVBS |
| Power supply | DC 12 V |
| Current consumption | 50 mA (DC 12 V) / ≤ 600 mW |
| IP protection rating | IP68 |
| Operating temperature | -20° C ~ +70° C |
| Optional cable | RCA (4PIN, BMW cable) |
| Optional sensor | 1/3“ / 8.5 mm Sony CCD Sensor |
Compatible to the following vehicles:
| Model | Type | Model Year |
| Fiat Ducato III | 250/251 | as of 2006 |
| Citroen Jumper II | 250/250D/250L | as of 2006 |
| Peugeot Boxer | 250/251 | as of 2006 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.