Tungsten Carbide Burrs For Grinding, Cutting And Polishing High Quality

​​Advantage:

• Better stock removal rate than burrs with a conventional cross cut.

• Significantly Saves money and time through its very high stock removal rate on key materials.

• Comfortable working with reduced vibration and less noise.

​​Materials that can be worked:

• Steel, cast steel

• Stainless steel (INOX)

• Non-ferrous metals

• Cast iron

Applications:

• Milling outLevelling

• Deburring

• Cutting out holesSurface workWork on weld seams

Notes

• It may be necessary to adjust the rates shown to achieve optimum performance.

• Harder materials require slower speeds.

• Smaller burs require faster speeds.

• Extra long burs (>150mm long) require slower speeds.

• Apply constant movement and light pressure when in use.

• Running below the optimum speed will encourage chipping.

• Running above optimum speed will cause tooth wear.

• Allowing the tool to become too hot may cause the braze to melt and detach the head from the shank.

• Using tools and collets that have become worn will encourage chipping.

• Do not sink the bur for more than one third of its periphery.

• Non-ferrous metals.