1800Mbps 802.11AX Wifi 6 Mesh Wireless Router 1WAN 3LAN Wifi Router

Mesh Router Brief overview

This document describes the electrical characteristics, RF performance, size and application environment of z6001ax-b. With the introduction of this document, end users or developers can quickly understand the hardware functions of z6001ax-b.

Z6001ax-b is a 5g + WiFi 6 home CPE product. It accesses the Internet through 1000Mbps WAN port dial-up, and then shares the Internet network through wireless WiFi 6 and 1000Mbps wired LAN.

Mesh Router Hardware Introduction

Wifi 6 Router Reference standard

Relevant standards and specifications:

• USB3.0 / USB2.0 bus standard
• PCI Express bus standard
• SIM/USIM interface standard
• IEEE802.11n/g/b/a/ac/ax
• IEEE802.3/802.3u/802.ab
• PCI Express M.2 Specification Rev1.1

Wifi 6 Wireless Router Main Features

• IPQ6000 scheme is adopted, with 4-core arm cortex a53s CPU, and the main frequency is up to 1.2 GHz
• Independent WiFi chip is adopted, with qcn5022 for 2.4G and qcn5052 for 5.8G
• The 2.4G rate is up to 573.5mbps, and the 5.8G rate is up to 1201mbps, collectively referred to as 1800 Mbps
• Support MU-MIMO, and WiFi modulation mode supports 1024-qam and OFDMA
• Each WiFi channel is independently equipped with high-power FEM, which is combined with high gain antenna to achieve super WiFi coverage
• High speed 256MB DDR3 with 128MB NAND flash storage
• Full 1000m adaptive network interface of 1wan and 3lan, supporting automatic flip (auto MDI / mdix)
• A built-in m.2 interface is used to connect 5g communication module, and the module power supply is independently controlled through GPIO
• External standard SIM card interface, supporting SIM / USIM card
• IPQ6000 has its own watchdog function, which automatically restarts in case of crash
• When multiple products are used at the same time, mesh automatic networking is supported