10/100/1000Mbps Dual Band Mesh Wifi Network Router
1. Simple Introduction
MESH routing system ZBT-L6 is a Gigabit dual-band home wireless networking set. Each node has a 10/100/1000Mbps WAN/LAN adaptive port, a 10/100/1000Mbps adaptive LAN port, and a wireless transmission rate of 1167Mbps.
There is 3pcs mesh router as one set. One named A, both of the rest two units named C.
You only need to connect the master router A to the network, and then power on the two slave routers C. Under normal circumstances, it will automatically network.
2. Specification
| Product Name | Gigabit Ethernet Port Mesh Router | Remark | |
| Product Type | LAN uplink (compatible with WIFI uplink) device | ||
| Model | ZBT-L6 | ||
| WAN | 1*10/100/1000M Auto MDI/MDIX WAN /LAN Port | ||
| LAN | 1*10/100/1000M Auto MDI/MDIX LAN Port | ||
| WLAN | 2.4G 300Mbps,5G 867Mbps | ||
| Hardware | Main Chipset | RTL8197FS-VE5 | |
| Main Frequency | 1GHz | ||
| FLASH | 16MByte | SOP8 | |
| RAM | 128MByte | ||
| Adapter | 12V1A | ||
| LED | 1*Integrated indicator | (Red, Green, Yellow) | |
| Button | Reset | ||
| Antenna | 2*3dBi | internal antenna | |
| Wireless Rate | 1167Mbps | ||
| Wireless Protocol | 802.11b/g/n 2.4GHz; 802.11ac/a/n 5GHz. | ||
| Wired Protocol | 802.3；802.3u | ||
| MESH networking standard | 802.11s | ||
| Roaming standard | 802.11v/r | ||
3.Interface
| Type | Demand item | Specification |
|
Wire Interface |
WAN | 1*10/100/1000 Base-T Interface,IEEE802.3/802.3u,Support full-duplex / half-duplex flow control. |
| LAN | 1*10/100/1000 Base-T Interface,IEEE802.3/802.3u,Support full-duplex / half-duplex flow control. | |
|
Power Interface |
1*Power Interface, The router is powered by an external power adapter. The external power adapter should: 1. Meet the EMC requirements of YD/T 983 and pass CCC certification; 2. Input voltage: 198-242V ~ 50Hz; 3. Output voltage DC: 12V ± 5%, ripple range ± 200mV, output current: 1A; 4. The MTBF time of the power supply is: greater than 30,000 hours; 5. The power supply interface of the device itself and the DC output interface of the power adapter should be a unified international standard circular interface with a DC head diameter of 2.1 mm; 6. The adapter's DC output power cord can be optionally equipped with an EMI absorption magnetic ring; 7. Under normal conditions, the insulation resistance between the metal casing of the equipment and the power line should be not less than 50MΩ. 8, should have lightning protection against surge test, lightning protection level of at least 1.5KV. |
|
|
Wireless Interface |
Wi-Fi Networking |
802.11b/g/n/ a/ac,2.4GHz/5GHz,Wireless rate 1167Mbps； 2* Internal 3dBi Omnidirectional dual frequency antenna. The Current wifi Device quantity can highly reach to 40 |
4.Button and LED
| Button and LED | Function Description |
| Reset | Press and hold the RST button for 6 seconds, then the indicator light flashes and then releases. The indicator light turns on and the system restarts. The last reply flashes to restore the factory settings. |
| LED |
Long green light: good connection quality Long yellow: the connection quality is normal Red long light: connection failed |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.