MTK7621 Dual Core Dual 4G modems 3G 4G Wifi Router with 2 SIM slots

Product PCBA board Picture

Main Feature

• Adopt MT7621A solution, MIPS dual-core CPU, the main frequency is up to 880MHZ
• Use independent WIFI chip, 2.4G is MT7603EN, 5.8G is MT7612EN
• 2.4G rate up to 300Mbps, 5.8G rate up to 867Mbps, dual frequency rate is about 1200Mbps
• Using high-speed 256MB DDR3 and 16MB Nor Flash
• 1 WAN+4 LAN (1000M adaptive network ports, support Auto MDI/MDIX)
• Support USB2.0 and TF card slots to expand SMABA or FTP network storage function
• Support "One-click mode"(press the reset button to enter the rescue and flash mode)
• Built-in two 4G PCIe module interfaces
• Two external Nano SIM card (small card) interfaces, both support SIM/USIM card

Brief Introduction 

This specification describes the electrical characteristics, RF performance, size and application environment of WG1602. It can help end users and developers quickly learn this model.

WG1602 is a 4G router with two 4G modules. It can access the Internet through 4G sim cards or 1000Mbps WAN port. Support load-balance and network backup.

Product Feature

• USB2.0 bus standard
• TF Card interface standard
• SIM/USIM interface standard
• PCI- Express bus standard
• IEEE802.11n/g/b/a/ac
• IEEE802.3/802.3u/802.ab
• Mini PCI Express Card Electro mechanical Specification Revision 1.0-2003
• 4G mobile communication standard

4G Mobile Communication Function

This product has two built-in PCIe interfaces of USB2.0 bus, which can be used to expand the function of 4G mobile communication. The frequency bands depends on the 4G modules.

As shown in the "Product Picture" , two 4G modules are each corresponds to two SIM cards. In this way, a dual-module & dual-SIM card can achieve traffic superstition or 4G network backup through software control.

Product Datasheet