761.8MHZ 5dbi 3G 4G Wifi Router IPQ4019 4g Wifi Hotspot
3*SIM Card Slots 3G 4G Wifi Router USB 3.0 Dual Bands Gigabit Ports
Reference Standard
Relevant standards and specifications:
- USB3.0/2.0 bus
- Nano SIM/USIM
- IEEE802.11n/g/b/a/ac
- IEEE802.3/802.3u/802.ab
- PCI- Express Standard
- Mini PCI Express Card Electro mechanical Specification Revision 1.0-2003
- The 4G mobile communication standard is determined by the selected 4G mobile communication module
Simple Introduction
WG1402 is a 4G routing product positioned for high network security. It accesses the Internet through 4G mobile communication dial-up or 1000Mbps WAN port dial-up, and then shares the Internet network via wireless WiFi 5 and 1000Mbps wired LAN.
Hardware Interface Introduction
| Ethernet interface |
1* Wan port, 1000Mbps, Support Auto MDI/MDIX Protocol: IEEE 802.3/802.3u/802.ab |
|
4* Lan ports, 1000Mbps, Support Auto MDI/MDIX Protocol: IEEE 802.3/802.3u/802.ab |
|
| USB | 1*USB3.0 |
| SIM slot |
3*Standard Nano SIM card slot(Smalleset sim card), support Nano SIM/USIM |
| Powder interface | DC5.0*2.1MM DC port |
| Botton | 1*reset button |
| Antennas | 2*omnidirectional 5dbi 2.4G & 5.8G dual-band antennas |
| 6*omnidirectional 5dbi 4G antennas | |
| PCIE | Built-in 3*4G PCIE module interfaces ,Support install 3pcs 4G module at the same time |
Selling Point
- Adopt IPQ4019 solution, quad-core ARM Cortex-A7 CPU, main frequency up to 761.8MHZ
- IPQ4019 integrates 2.4G and 5.8G WIFI functions, both 2.4G and 5.8G support MU-MIMO
- Using High Speed 256MB DDR3, 32MB Nor Flash
- 1WAN, 4LAN all 1000M adaptive network ports, support automatic flip (Auto MDI/MDIX)
- Support USB3.0 storage interface, can be used to expand SMABA or FTP network storage function
- Support "One-key flash mode", that is, long press the reset button to enter the rescue flash mode
- Built-in 3*mini-PCIe slots, it can be installed 3pcs 4G module
- External 3pcs Nano SIM slot, support SIM/USIM
- External high gain omnidirectional antenna, wireless signal 360 degree coverage
Indicator Lights Introduction
|
LAN1 LAN2 LAN3 LAN4 |
Light on: connect the network port Flashing: data is communicating |
| WAN |
Light on: connect the network port Flashing: data is communicating |
| Power |
Light on: Power on Light off: power supply is not connected or failed |
| 5.8G WIFI |
Light on: always on when 5.8G WiFi function Light flashing: data is communicating Light off: 5.8G WiFi is not turned on or 5.8G WiFi is faulty |
| 2.4G WIFI |
Light on: always on when 2.4G WiFi function Light flashing: data is communicating Light off: 2.4G WiFi is not turned on or 2.4 WiFi is faulty |
|
4G1 4G2 4G3 |
Light on: 4G module is working Light off: 4G module is not installed or 4G module is faulty |
Hardware Platform Introduction
| Processor | IPQ4019 Chipset, Quad Core ARM Cortex-A7 CPU, main frequency 761.8MHZ |
| 2.4G WIFI | IPQ4019 integrated 2.4G WIFI baseband, IEEE 802.11n/g/b, 400mps |
| 5.8G WIFI | IIpq4019 integrated 5.8G WiFi baseband, IEEE 802.11a/ac, 867mbps |
| RAM | DDR3 256MB |
| Flash | Nor Flash 32MB |
| NAND Flash (Support Customizable firmware) |
WIFI 5.8G
It is compatible with IEEE 802.11 a / AC and supports IEEE 802.11 D / E / h / I / K / R / W; It supports 20MHz, 40MHz and 80MHz, adopts 2T2R MU-MIMO antenna technology, and the maximum connection rate is 867mbps. The following is a description of power frequency, receiving sensitivity and transmitting power of 5.8G WiFi.
| Explanation | Maximum | Rated value | minimum value | Unit | |
| Working Frequency | 5825 | 5180 | MHz | ||
| Receiving sensitivity | 54 Mbps OFDM | -72 | -74 | -75 | dBm |
| BW=20MHz MCS 7 | -70 | -72 | -73 | dBm | |
| BW=40MHz MCS 7 | -69 | -70 | -71 | dBm | |
| BW=80MHz MCS 9 | -58 | -59 | -60 | dBm | |
| Transmitting power | 54 Mbps OFDM | 19 | 18 | 17 | dBm |
| BW=20MHz MCS 7 | 18 | 17 | 16 | dBm | |
| BW=40MHz MCS 7 | 18 | 17 | 16 | dBm | |
| BW=80MHz MCS 9 | 17 | 16 | 15 | dBm |
Structural Parameters and Accessories
| Weight(KG) | TBD | |
| Products sizes | L*W*H=249*160*42MM(Without antennas) | |
| Color | Black | |
| accessories | Adapter | 12V/2.5A 1PCS |
| Manual | 1PCS | |
| Certificate | 1PCS | |
| Cable | 1PCS | |
| Antennas |
2PCS 2.4g-5.8g 5dB removable dual frequency antenna2.4G5.8G 5DB |
|
| 6pcs 4G 5DBi antenna | ||
Company Information
SHENZHEN ZHIBOTONG (ZBT) Electronics Co., LTD established in 2010, located at Shenzhen, China. ZBT is a manufacturer professional in R&D and producing network equipments, products are included POE switch, Access Point, openWRT wifi router, Vehicle router, outdoor CPE, 3G/4G wifi router. ZBT also is a wifi coverage sloutions provider, provides the solution for hotel, school,hospital,enterprise,vehicle field etc. ZBT with 50 people R&D team and around 500 people in factory, 10,000 Square meters production scale, is very skilled at processing OEM/ODM design, also builds the long term cooperation with Mediatek, Broadcom,Qualcomm, capably offering good quality product and fast after-sale service.Till now, ZBT's products have exported to over 30 countries and regions.Adhere to the conception of 'High Quality, High Performance & High Satisfaction' , Each year ZBT would taken out more than 35% of the annual turnover as R&D funds to develop new products so as to satisfy clients' new coming requests.Customers' high satisfaction is ZTB's continuously pursue,high-quality&best service is ZBT's sincere promise to all clients. ZBT warmly welcome everybody joining in and build a win-win cooperation.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
