Wireless Indoor Wifi 6 Mesh Router White Color Plastic Case IPQ6000 CPU
Wireless Router White Color Plastic Case IPQ6000 CPU 1800Mbps 2.4GHz 5.8GHz Indoor Mesh Wifi6 Strong Wifi Cover
1.1 Brief overview
This document describes the electrical characteristics, RF performance, dimensions and application environment of Z6001AX-,2-C. Under the introduction of this document, end users or developers can quickly understand the hardware functions of Z6001AX-M2-C.It is a WiFi 6 home router, which can access the Internet through WAN port, and then share the Internet through wireless WiFi 6 and 1000Mbps wired LAN.
1).Support IEEE 802.11ax/ac/n/11b/g standard.
2).1*WAN+3*LAN 10/100/1000Mbps ports.
3)1* USB 3.0 data interface.
4).High speed 1800Mbps,dual band and gigabit ports.
5).M.2 interface,LCC/PCIE interface compatible design.
6).Support MESH automatic networking.
7).Standard SIM card slot.Support SIM/USIM card.
Hardware specs:
| Ports |
1*1000M WAN Port (Auto MDI/MDIX) IEEE 802.3/802.3u/802.ab |
|
3* 1000M LAN Ports(Auto MDI/MDIX) IEEE 802.3/802.3u/802.ab |
|
| USB | 1* USB3.0 |
| DC port | DC5.0*2.1MM interface |
| Button | 1* Reset button |
| antennas |
2* internal omnidirectional 5dBi 2.4G antennas, 2* internal omnidirectional 5dBi 5.8G antennas |
4.2 Function of indicator light
| Power LED | Always on when the power is connected, not on when the power fails or is not connected to the power supply |
| WAN LED | The Internet port is always on, flashes when there is data communication, the network port comes with LED |
| LAN1 LED | The Internet port is always on, flashes when there is data communication, the network port comes with LED |
| LAN2 LED | The Internet port is always on, flashes when there is data communication, the network port comes with LED |
| LAN3 LED | The Internet port is always on, flashes when there is data communication, the network port comes with LED |
| 5.8G LED | It is always on when the 5.8G WIFI function is enable,flashes when there is data communication, and it is not on when the 5.8G WIFI is not enable on or the 5.8G WIFI function is faulty. |
| 2.4G LED | It is always on when the 2.4G WIFI function is enable,flashes when there is data communication, and it is not on when the 2.4G WIFI is not enable on or the 2.4G WIFI function is faulty. |
| SYS LED |
1. The red light is on during the boot process, the boot is complete, the red light is off and the green light is on 2. Press the mesh button to enter the mesh pairing state, the green light flashes once a second, and the other lights are off 3. The main equipment network is normal, the green light and blue light are on at the same time (cyan) 4. The slave device MESH is successfully connected, the green light is on at a long distance, the red light is on at the same time (orange), the distance is suitable, the green light is on, and the blue light is on at the same time (cyan) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.