High Efficiency Rotating Mechanical Bar Screen Wastewater Treatment Plant Support
High efficiency rotating mechanical bar screen for wastewater treatment plant
The Chain Driven Bar Screens are the mostly preferred screening equipment for removal of solids sizing in a wide range. They are specially designed for installation as coarse and fine screens for medium and large sized water and wastewater treatment plants. Chain Driven Bar Screen “AME” is mainly consisting of bar screens, frame, dead plate and discharge chute which is equipped with a ladle rake and a counter cleaning mechanism.
Technical Parameters
| Model Parameter |
GNCF -500 |
GNCF -600 | GNCF -700 |
GNCF -800 |
GNCF -900 |
GNCF -1000 |
GNCF -1100 |
GNCF -1200 |
GNCF -1300 |
GNCF -1400 |
GNCF -1500 |
|
| Device Width(mm) | 500 | 600 | 700 | 800 | 900 | 1000 | 1100 | 1200 | 1300 | 1400 | 1500 | |
| Channel Width B1(mm) | B+100 | |||||||||||
| Effective Grille Spacing B2(mm) | B-157 | |||||||||||
| Anchor Bolts Spacing B3(mm) | B+200 | |||||||||||
| Total Width B4(mm) | B+350 | |||||||||||
| Teeth Spacing b(mm) | t=100 | 1≤b≤10 | ||||||||||
| t=150 | 10＜b≤50 | |||||||||||
| Installing Angle α(˚) | 60-85 | |||||||||||
| Channel Depth H(mm) | 800-12000 | |||||||||||
| Height Between Discharge Port and Platform H1(mm) | 600-1200 | |||||||||||
| Total Height H2(mm) | H+H1+1500 | |||||||||||
| Back Rack Height H3(mm) | t=100 | ≈1000 | ||||||||||
| t=150 | ≈1000 | |||||||||||
| Screen Speed v(m/min) | ≈2.1 | |||||||||||
| Motor Power N(kw) | 0.55-1.1 | 0.75-1.5 | 1.1-2.2 | 1.5-3.0 | ||||||||
| Head Loss(mm) | ≤20(no jam) | |||||||||||
| Civil Load | P1(KN) | 20 | 25 | |||||||||
| P2(KN) | 8 | 10 | ||||||||||
| △P(KN) | 1.5 | 2 | ||||||||||
| Model Parameter |
GNCF-500 | GNCF-600 | GNCF-700 | GNCF-800 | GNCF-900 | GNCF-1000 | GNCF-1100 | GNCF-1200 | GNCF-1300 | GNCF-1400 | GNCF-1500 | ||
| Flow Depth H3(m) | 1 | ||||||||||||
| Flow Velocity V(m/s) | 0.8 | ||||||||||||
| Grid Spacing b(mm) | 1 | Flow Rate Q(m3/s) | 0.03 | 0.04 | 0.05 | 0.06 | 0.07 | 0.08 | 0.08 | 0.09 | 0.1 | 0.11 | 0.12 |
| 3 | 0.07 | 0.09 | 0.1 | 0.12 | 0.14 | 0.16 | 0.18 | 0.2 | 0.22 | 0.24 | 0.26 | ||
| 5 | 0.09 | 0.11 | 0.14 | 0.16 | 0.18 | 0.21 | 0.23 | 0.26 | 0.28 | 0.31 | 0.33 | ||
| 10 | 0.11 | 0.14 | 0.17 | 0.21 | 0.24 | 0.27 | 0.3 | 0.33 | 0.37 | 0.4 | 0.43 | ||
| 15 | 0.13 | 0.16 | 0.2 | 0.24 | 0.27 | 0.31 | 0.34 | 0.38 | 0.42 | 0.45 | 0.49 | ||
| 20 | 0.14 | 0.17 | 0.21 | 0.25 | 0.29 | 0.33 | 0.37 | 0.41 | 0.45 | 0.49 | 0.53 | ||
| 25 | 0.14 | 0.18 | 0.22 | 0.27 | 0.31 | 0.35 | 0.39 | 0.43 | 0.47 | 0.51 | 0.55 | ||
| 30 | 0.15 | 0.19 | 0.23 | 0.27 | 0.32 | 0.36 | 0.4 | 0.45 | 0.49 | 0.53 | 0.57 | ||
| 40 | 0.15 | 0.2 | 0.24 | 0.29 | 0.33 | 0.38 | 0.42 | 0.46 | 0.51 | 0.55 | 0.6 | ||
| 50 | 0.16 | 0.2 | 0.25 | 0.29 | 0.34 | 0.39 | 0.43 | 0.48 | 0.52 | 0.57 | 0.61 | ||
Woking Principles:
The bar screens are cleaned by the help of a ladle rake which is connected to an endless chain operating between two sprockets. The ladle rake is lowered down to the bottom of the channel in open position. It is closed at the bottom to clean the debris which is settled on the screen bars and moves up. The collected debris in the ladle rake is cleaned by a counter wiper when the ladle rake reaches to discharge point. Here the screenings are either removed to a container or a transporter for further processing.
Advantages:
1.High Automaticity-can work continuously without any operation
2.High Separative Effiency
3.Low Power Consumption
4.No Noise
5.Good Corrosion Resistance
6.Self-Protection---when overload,it will give sound-light alarm and stop working automatically
7.Can work based on different setting
8.Self Control and Manual Control
9.Self Cleaning
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.