Double Sheet Detecting Stainless Steel 4HZ Ultrasonic Level Sensor

Price Negotiable

Price: Negotiable

MOQ: 1 Piece

Delivery Time: 3~30 working days

Brand: YUJIE

Product Description

High Accuracy Ultrasonic Sensor Level Measurement For Double Sheet Detecting

Highlights

Can handle wide range of materials and thicknesses

Two different transmission frequencies (400 kHz and 255 MHz) to handle the most material types possible in any given application

Ready for immediate use with no teach -in required

Clearly visible LED for quick status indication

Technical data
General Specifications
Sensing distance	60mm
Adjustment range	60mm
Unusable area	0…80mm
Standard target plate	100mm×100mm
Transducer frequency
Response delay	About 195ms
Indicators/Operating means
LED blue	Power on
LED yellow	Flashing:program function object detected
LED red	permanently red: Error Red,flashing:object not detected
Electrical specifications
Operating voltage U_B	10 … 30 V DC 3.3… 5.5 V DC
No-load supply current	≤20mA
Electrical Interface	PVC cable
Dimensions Φ18 Φ30
Output
Output type	3 switching PNP output 3 switching NPN output
Rated operational current	200mA,short-circuit/overload protected
Default setting	80mm----0V/4mA, 2000mm----10V/20mA
Voltage drop	≤ 3V
Repeat accuracy	≤ 1%
Switching frequency f	≤ 4HZ
Range hysteresis H	1% of the set operating distance
Temperature influence	± 1.5% of full-scale value
Ambient conditions
Ambient temperature	-40°C to 70°C
Storage temperature	-40…85℃(233...358K)
Mechanical specifications
Protection grade	IP67
Connection
Material Housing	PBT or FRP
Transducer	epoxy resin/hollow glass sphere mixture; foam polyurethane,cover PBT
configuration	Command(digital output)
Electrical Interface	PVC cable
Standard conformity	EN 60947-5-2:2007 IEC 60947-5-2:2007

Installation conditions

If the sensor is installed at the environment temperature fall below 0℃,It should do well on the protective measures. In case of direct mounting of the sensor in a through hole using the steel nuts, it has to be fixed at the middle of the housing thread.

V1 Connector