Manual 500RPM Three Roll Mill 20L/h 3 Roll Mill ZYTR-80 Rolls can be cooled and heated

Product specification

What is the construction principle of the three-roll mill?

A three-roll mill has three rollers mounted on an iron frame with the center in a straight line. Can be installed horizontally, or slightly inclined. The grinding effect is achieved by the mutual extrusion of the surfaces of the three horizontal rollers and friction at different speeds.

The steel drum can be hollow and cooled by water. The material is added between the middle roll and the rear roll. Because the rotation directions of the three drums are different (the rotation speed increases sequentially from the back to the front), a good grinding effect is produced. After the material is ground, it is scraped off by a scraper installed in front of the front roller.

Main feature

1. Roller Material: ZrO2/ Al2O3/ SiC/ Si3N4, Nanoscale Ceramic Roller

2. Ceramic Roll Speed: 0-500RPM

3. Power Configuration: Servo motor, Steady moment, Safe and reliable

4. Adjust the gap between two rolls by single handle,

Ceramic rollers parallel movement, more convenient

5. High precise (minimum 1μm, depend on materials)

6. Ceramic roller precision: concentricity < 2 micron,

linear degree < 2micron, exterior planeness < 0.3micron

7. Easy-cleaning roller

8. Hopper(optional)