High-speed three-roll mill, roll-type mixing mill, rotating speed 0-500RPM

Product specification

Main feature
1. Roller Material: ZrO2/ Al2O3/ SiC/ Si3N4, Nanoscale Ceramic Roller

2. Ceramic Roll Speed: 0-500RPM

3. Power Configuration: Servo motor, Steady moment, Safe and reliable

4. Touch screen

5. High precise (minimum 1μm, depend on materials)

6. Ceramic roller precision: concentricity < 2 micron,

linear degree < 2micron, exterior planeness < 0.3micron

7. Easy-cleaning roller

8. Hopper(optional)

Preparation before use:

1.Check whether the position and locking of each component are normal, inject lubricating oil according to the point shown in the figure, and turn on the power
2.Adjust the front, rear, left, and right handwheels to observe whether the roller linkage is normal
3.Remove the dirt on the roller surface: wipe with soft paper or clean cotton yarn, release the knob of the baffle plate
4.Adjust the gap between the front and rear rollers and the middle roller to 0.5 mm, and then start the power supply to idle for 1-2 minutes.

Package&Shipping

- Packing: 1set/ wooden box
- Outside package: Standard export wooden

- Inner package:Shock-proof plastic film