316L 3um 10 Inch Stainless Steel Filter Mesh Filtering Sewage

20inch Precision Filter Sewage Treatment Stainless Steel Filter Mesh

Product introduction

Stainless steel sintered mat filter element is mainly made of stainless steel fiber sintered mat and stainless steel braided net processed by folding process. Stainless steel fiber sintered mat can be made into a multi-layer structure with pore diameter from coarse to fine, with high porosity, high pollution carrying capacity and other characteristics.Stainless steel woven mesh is made of stainless steel wire of different diameters, made of filter element has good strength, not easy to fall off, easy to clean, high temperature resistance, economic use and other characteristics.

Stainless steel sintering filter not only can be used as a basket strainer, mesh filter filtration equipment such as filter medium, and because the stainless steel sintering filter with high filtration precision, high temperature resistant, corrosion resistance, high mechanical strength and easy processing, long life and many other excellent performance, so more and more applied to the petroleum and petrochemical industry in the field of the separation of products and processes in the media.

Product parameters

Product features

• 1, stainless steel precision filter element with high porosity, good air permeability, small resistance, low use pressure difference;
• 2. After the stainless steel precision filter is folded, the filter area is large and the pollution is large;
• 3, Stainless steel precision filter element high temperature resistance, corrosion resistance, suitable for high viscous liquid filtration;

Cleaning method

• 1. Generally choose backwashing on the production line: first close the pipe switch of raw solution and filtrate, rinse with bacteria-free water, input from the original outlet, discharge from the inlet or the lower drain hole of the filter, backwashing should have pressure but not too large, generally about 5kg.
• 2. Remove the stainless steel folding filter element and put it in the cleaning solution for cleaning. First soak it in repeated cleaning.
• Cleaning fluid is generally available:
• A. Sodium hydroxide, 0.1 nNaOH
• B.1-2% citric acid solution or 0.1N oxalic acid solvent, 0.1N hydrochloric acid solvent

Factory introduction