500kg Titanium Mirror Etching Stainless Steel Passener Villa Elevator With Good Quality
| Spercification |
Parameter
|
||
| Rated capacity(kg) | 400 | ||
| Speed(m/s) | 0.4 | ||
| Drive method | Steel belt traction drive | ||
| Door control | VVVF | ||
| Traction machine | Permanent Magnet Synchronous Gearless Motor | ||
| Control System | Integrated Controller | ||
| Motorrated power(kW) | 1.2 | ||
| rated current(A) |
5
|
||
| Starting power atrated load(A) | 7.5 | ||
| Power | Standard: Singlephase220V(Optional 380V);3.5kVA | ||
| Minimum wiringrequirements | 2*2.5 mm2 coppersheath cable+2.5mm'yellow-green cable | ||
| travel height(m) | ≤18 | ||
| Minimum floor height | Door height+350 (2PCO)/Door height +375 (4PCO)/Door height +420 (side opening) | ||
|
Shaft size (width*Depth)mm
|
1600*1545 | 1350*1615 | 1800*1100 |
|
Ca size(mm) (width*depth*height)
|
1200*1100 | 950*1100 | 1250*850 |
|
Door opening1350*1615 size(mm) (width*height)
|
Central Opening(narrowjamb)750*2000 | Left Side Opening(narrowjamb)700*2000 | Central Opening(narrowjamb)800*2000 |
|
Counterweight arrangement
|
Rear counterweight | Side counteweight | |
|
Car height(mm)
|
2100 | ||
|
Overhead height(mm)
|
≥2900 | ≥2950 | |
|
Pit depth(mm)
|
With marble: 225 With PVC:200 | ||
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.