Quality Center Opening Landing Door Device for Elevators with ≤ AC230V, ≤ DC110V Voltage and IP2X Protection Level Passed 45kg Pendulum Impact Test
◎Unlocking hole on landing panel or door jamb, passed 45kg pendulum impact test
◎Closing by weight type, weight and guiding pipe fixed at inner side of landing panel
◎Door lock qualified by the NATIONAL ELEVATOR INSPECTION CENTER, Level of protection is IP2X
◎Voltage for door lock: ≤ AC230V,≤ DC110V



Our elevator wire ropes meet special provisions and requirements. The configuration considers not only wire rope and rated load, but also traction size, resulting in tensile strength greater than the lift weight. The safety factor includes at least four wire ropes to prevent simultaneous breakage.
The elevator will automatically stop using electrical and mechanical safety devices. In case of power failure, elevator brakes engage automatically. Power supply departments typically provide advance notice for planned outages.
The door automatically restarts if touched during closing, with no danger. Anti-pinch switches prevent closure when obstruction is detected, and closing force is carefully regulated.
Elevators operate via counterweight wire ropes through traction drive, moving vertically on guide rails.
Our escalators feature integrated structures for precision and efficiency, designed for easier installation and commissioning.
Yes, we hold ISO9001, CCC, and CE Certificates for our products.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
