Claw Insulator INS608B 30.2g Wood Post Electric Fence Insulators For 9mm Poly Wire
Product Overview
The INS608B is a wood post claw insulator sized for thicker conductors up to 9 mm. The claw wraps the wire so it cannot slip down the post, while the impact-resistant PE body takes the knocks of daily farm use. At 30.2 g it adds little load to timber posts even over long runs.
Key Features
- Claw form holds thick conductors and stops them slipping
- Wide 9 mm capacity suits heavy poly wire and poly rope
- Impact-resistant PE body for rough pasture conditions
- Low 30.2 g mass keeps long fence lines light
- Mounts straight onto timber posts
- Colour, packaging and material can be customized
Specifications
| Attribute | Detail |
|---|---|
| Item Code | INS608B |
| Product Type | Wood post claw insulator |
| Material | PE |
| Colour | Black |
| Weight | 30.2 g |
| Conductor Capacity | Wire, poly wire, poly rope up to 9 mm |
| Mounting | Wood post |
| Package | 250 pcs per case |
| Carton Size | 53.5 x 43.5 x 16.5 cm |
| Port | Shanghai or Ningbo |
Where To Use
Use the INS608B on timber posts carrying heavier poly wire or rope, such as cattle and sheep boundary fences where a strong, wide conductor is used. The claw keeps the line tidy and lets it be re-tensioned without being removed.
Installation Tips
Set the claw at wire height on the post, press the conductor firmly into the grip and confirm it is fully seated. Run out the line and tension it, then check the conductor still slides freely. Look for wear in the claw when servicing the fence.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.