ISO GLD13 GLP13 2.0Mpa EPDM Heat Exchanger Gaskets
TRANTER GLD13 GLP13 Heat Exchanger Gaskets
aiprel supplies Tranter plate heat exchanger gasket and plate replacements. Tranter Model List as below.
Main Features
1. High heat transfer coefficient
2. Small footprint and easy maintenance
3. Safe and reliable use
4. Less resistance loss
5. Less heat loss
6. Conducive to the utilization of low temperature heat sources
7. Multiple medium heat exchange
8. Easy to clean and fast
| Brand/Maker | Series |
| TRANTER | GCD006,GCD012,GLD013,GLP013,GCD018,GCP026,GCD030,GCP030, |
| GCP051,GCP054,GCD054,GCD055, | |
| SWEP | GCP060,GCD065,GCD018,GC8,GC12,GL13,GC26,GC30,GC42,GC51,GC60, |
| GL145,GL205,GL230,GL330, | |
| GX7,GX12,GX18,GX26,GX42,GX51,GX60,GX64,GX85,GX91, | |
| GX100,GX118,GX140,GX145,GXD012,GXP018, | |
| GX026,GXD026,GXP026,GXP037,GXD037, | |
| GX042,GXD042,GXP042,GX051,GXP051,GXD051, | |
| GXD060,GXD064,GXD085,GXD091,GXD100,GXP118,GXD140,GXD145, | |
| GFP030,GFP050,GF057,GFP057,GFP080,GFP097,GF097, | |
| GFP100,GFP180,GFP187,GF187, | |
| S3,S8,HX12,HXD012,HX25,HX50,HXD050,HX85,HXD085,HX180,HXD180,HXD145, | |
| GM56,GM59,GM138,GM257,GM276, | |
| TW5,TW10,TW18, | |
| UX01,UX05,UXP005,UXP010,UXP060,UX06T,UX10,UX20,UX40,UXP200,UXP400, | |
| UX80,UXP81,UX801,UXP900, | |
| G12,G28,G30,G48,G50,G55,G65,G66,G75,G78,G85, | |
| G95,G25,G52,G58,G102,G108,G153,G157,G158,G159, | |
| G214,G234,G254,G274,G322,G342,G52,G58,G65, | |
| GF138,GF257,GF276,GF59,MF138,MF257,MF276,MF56,MF59 |
Material and operating conditions of gasket:
| Material | Application | working temperature |
| NBR | Water, sea water, mineral oil, salt water | -15—130℃ |
| HNBR | High temperature mineral oil, high temperature water | 15—140℃ |
| EPDM | Water,Hot water, steam, acid, alkali | -25—150℃ |
| Viton／Fluorine Rubber | Strong acid, strong alkali, mineral oil, grease and fuel oil, etc | 5—200℃ |
| NEOPRENE | Acid, alkali, mineral oil, low molecular weight aliphatic hydrocarbon | 35—130℃ |
| Silicon Rubber | High temperature and some corrosive environments | 65—200℃ |
The plate heat exchanger consists of a pack of corrugated metal plates with portholes for the passage of the two fluids between which heat transfer will take place. The plate pack is assembled between a fix frame plate and a movable pressure plate and compressed by tightening bolts. The plates are fitted with a gasket which seals the inter plate channel and directs the fluids into alternate channels. The number of plates is determined by the flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plates against differential pressure. The frame plate and the pressure plate are suspended from an upper carrying bar and located by a lower guiding bar, both of which are fixed to a support column. Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.
| PLATE MATERIAL | SS304, SS316, 254SMO, 904L, C276, Titanium, Nickel, Incoloy825 |
| PLATE THICKNESS | 0.5mm, 0.6mm, 0.7mm, 0.8mm, 1.0mm |
| GASKET MTERIAL | EPDM, NBR, HNBER, HEPDM,FKW |
| GASKET ASSEMBLY | Clip on, Lock in, fasten, Glued |
| FRAME MATERIAL | Carbon steel, Stainless steel, Stainless steel coat |
| NOZZLE | Flange, Rubber insert, Metal insert, Thread, Clamp |
| CONNECTION SIZE | DN15~DN500 |
| CONNECTION STANDARD | Custiomized |
| COLOR | Custiomized |
| APPLICATION | HVAC, Power, Suger, Marine, Chemical, etc |
Due to the uncertainty of heat exchanger selection and design, the price displayed is a range. For details, please contact customer service. If you do not communicate in the previous period, the customer service cannot accept it.
Advantage:
Comparing to other other types of heat exchanger, plate heat exchangers have larger surface area. They are composed of a number of thin metal plates compressed together. Gasket is attached to the heat transfer plate with forms flow channel and acts seal up the fluid. Different materials have different channels and in their respective flow path alternately. They won't leak to the outside. The number of the heat transfer plate is determined according to the amount of fluid, physical properties of fluid,the pressure drop and thermal condition. Each plate is corrugated to increase the maximum heat transfer area.
Introduction of plate heat exchanger manufacturer:
We are a genuine original PHE manufacturer with all components are produced in our own factory and complete end products.
We passed the ISO9001: 2000 Quality System Certification, ISO14001: 2004 Environmental System Quality Certification. Our registered capital is 50.00 million, and annual revenue of over RMB 200 million.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.