Anti Corrosion Water Well Sand Screen With Welded Rings End Connection
| Attribute | Value |
|---|---|
| Material | Stainless steel |
| Grade | 304 |
| Slot size | 1.0 mm |
| Diameter | 8" |
| Length | 5800mm |
| End connection | Welded rings |
| Package | Wooden box, Container |
Energy Saving And Lowest Possible Cost Sand Control Screens OEM / ODM Acceptable
Sand Control Screens are made by winding cold-rolled wire, approximately triangular in cross section, around a circular array of the longitudinal rods. The wire is attached to the rods by welding, producing rigid one-piece units having high strength characteristics at minimum weights. There is a fixed value slot between each V wire, and the continuous slot is designed to provide maximum open area to reduce entrance velocity, increase hydraulic efficiency and promote more effective development.
| Parameter | Value |
|---|---|
| Material | Stainless steel |
| Grade | 304 |
| O.D | 219 mm |
| Size | 8" |
| Slot size | 1.0 mm |
| Length | 5.8 m |
| End connection | Welded rings |
| Wire size | 118 # |
| Support rod | 140 # |
| Wire shape | V shape |
| SIZE (INCH) | O.D (MM) | SLOT (MM) | LENGTH (M) | COLLAPSE STRENGTH (BAR) | TENSILE WEIGHT (TON) | WRAP WIRE(WIDTH*HEIGHT) (MM) | RODS (MM) |
|---|---|---|---|---|---|---|---|
| 3-1/2 | 88.9 | 1.0 | 3 | ＞22 | 10.2 | 2.3*3.5 | 3.8MM/22 |
| 4-1/2 | 114.3 | 1.0 | 3 | ＞28 | 11.5 | 2.3*3.5 | 3.8MM/22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | ＞40 | 12.8 | 2.3*3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 1.0 | 5.8 | ＞33 | 12.8 | 2.3*3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | ＞83 | 45 | 3.2*6.0 | 6.0MM*32 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞34 | 21.9 | 2.3*3.5 | 3.8MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞50 | 38.2 | 3.0*5.0 | 4.0MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | ＞60 | 46 | 3.2*6.0 | 5.0MM/48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | ＞50 | 32.9 | 2.3*3.5 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞60 | 39.5 | 3.0*5.0 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | ＞100 | 48 | 3.2*6.0 | 5.0MM/55 |
| 12-3/4 | 323.9 | 1.0 | 5.8 | ＞120 | 37.2 | 3.0*5.0 | 4.0MM/50 |
| 14 | 355.6 | 1.0 | 3 | ＞80 | 37.8 | 3.0*5.0 | 4.0MM/59 |
- Screens with high open area are more suitable for the construction of high-quality water wells, oil wells and gas wells.
- Low cost operation - Screens with high open area shall favor groundwater infiltration. Abundant water shall reduce the water level's down, thus to save energy consumption.
- Reduce the abrasion of the pump - Under the same condition, high open area can make the speed of groundwater's entering into the screen much slower than any other filtration apparatus, which will avoid sand's entering into screen because of high pressure, thus reduce the abrasion of the pump.
- Extend the life span of wells - Comparatively, groundwater's entering into screen with higher open area is much easier than the entering into lower open area screen. The slow water flow shall extend the life span of wells.
Please tell us the specification of the wire screen you need, and we will help you to process the high quality products.
Customization Range:
- Filter pipe material: mainly stainless steel, carbon steel galvanized, carbon steel spray or other customer requirements material
- Gap: 0.1mm-15mm, arbitrarily selected screen size to meet different construction requirements
- Diameter: 2" 3" 4" 5" 6" 8" 10" 12" 14" 16" 20". 29 mm - 1000 mm
- Length: 2.9 M, 5.85 M. Up to 6 M
- Connection form: groove connection/weld ring connection or thread connection
- Heavy oil, sand oil, light oil, SAGD, CBM, bitumen, thermal
- Water injection, bi-modal sand, carbonates, thin pay
- Horizontal, vertical, deviated oil and gas and water wells
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.