2520 2014 Steel Pipe Fitting Mould Core Rod Dies
Pipe Fitting Mould Material 2520 2014 304L 45 steel Moulds Core Rod Dies
Product Description of Pipe Fitting Mould Material 2520 2014 304L 45 steel Moulds Core Rod Dies
The mandrel for elbow hot forming machine comes with an ox horn shape, and is necessary during the hot forming process. Due to the special shape design, it enables diameter expanding while creating the bending.
When the pipe section passes through the mandrel, the mandrel will be hold firmly via a holding mechanism.Then, a trolley, which may be hydraulically driven or mechanically driven via leadscrews, will be available to push the pipe section to move along the mandrel.Outside the mandrel, there is an induction coil which serves to heat the pipe section. After thorough heating, the trolley further pushes the pipe section to unload it, and thus a pipe elbow is created.Elbow sizing dies are specialised in sizing the dimension of the elbows after its first hot forming, the specification of the dies could be up to 2 metes in diameter, and it could also be manufactured based on the customised requirement and sketch.
Pipe Fitting Mould Material 2520 2014 304L 45 steel Moulds Core Rod Dies for elbow hot forming.
The utility model relates to an industrial forming mold for motor coil down lead lug, which belongs to the motor production, in particular to an universal elbow mold for motor coil coil down lead lug.
Tube , pipe fitting choice of hot-melt or bend, pipe fittings and hot-melt die.
And the mandrel material used in our factory has the characteristics of wear resistance, bending resistance and strong impact resistance, and the surface is bright and clean, suitable for the extrusion of copper, iron, aluminum, zinc, stainless steel and other metals. Its advantages are as follows:
1. High hardness and abrasion resistance surpasses the die steel, and does not strain the surface of the machined part.
2. Compared with steel molds, it has good thermal conductivity and does not stick to molds, which can ensure uniform mold temperature distribution during work, will not cause mold cracks due to local high temperature, and will not cause cold sweat, exfoliation, and wrinkles in stretched products. phenomenon.
3. Economic and practical, long life of core rod material.
4. The core rod material processing technology is simple. Compared with steel molds, no direct heat treatment is required for direct polishing. Therefore, the heat treatment cost is reduced, the mold processing time is shortened, and the number of stretching times can be reduced and the cost of the mold can be reduced.
| Parts Specifications of Pipe Fitting Mould Material 2520 2014 304L 45 steel Moulds Core Rod Dies | |
| Material | 2520 ,2014, 304,45# steel ,40# steel,47# steel |
| Size | 27mm ,33mm ,42mm ,48mm ,60mm,73mm,89mm ,102mm ,114mm,141mm ,168mm,219mm,273mm,324mm,356mm ,406mm ,457mm ,508mm ,559mm ,610mm ,660mm ,711mm ,762mm,813mm ,864mm ,914mm ,926mm ,1016mm ,1067mm ,1118mm ,1168mm ,1219mm |
| Pipe Fitiings Mould Type | Elbow Mould Die ,Tee Mould Die ,Cap Mould Die, Reducer Mould Die ,Pipe Mould Die |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.