Gantry Large Diameter Stainless Steel Band Saw Machine 0.15KW Cooling Generator Power

Gantry Large Diameter Stainless Steel Band Saw Machine 0.15KW Cooling Generator Power

1. Purpose
In order to operate and maintain the metal band sawing machine safely and correctly, this procedure is specially formulated.

2. Scope of application
This procedure is applicable to the safe operation and maintenance of metal band sawing machine.

3. Responsibilities
3.1 The production department is responsible for supervising the implementation of this procedure. 
3.2 the equipment user is responsible for the safe and correct use and maintenance of the equipment.

4. Contents and requirements
4.1 the operator of the sawing machine must receive professional training, master the operation skills of the metal band sawing machine, and be familiar with its relevant performance. A kind of
4.2 before operation, run the car empty first to check whether the operation is stable, whether the clamping device is reliable and whether there is noise. A kind of
4.3 according to the specification of the material to be cut, the material shall be selected reasonably: the pitch of the saw belt; the appropriate cutting amount and coolant, and the position of the guide arm shall be adjusted. A kind of
4.4 the maximum diameter of the saw material shall not exceed the specified value. The workpiece must be clamped stably, the band saw blade shall be properly tightened, and the speed and feed rate shall be appropriate. A kind of
4.5 when cutting multiple pieces, a reasonable number of pieces shall be selected to ensure that each piece is in the clamped state. The sawed workpiece shall be cleared away from the band saw in time and the workpiece shall be stacked neatly. A kind of
4.6 it is forbidden to open, dismantle and move the safety protection device and warning nameplate on the machine tool arbitrarily.

4.7 it is forbidden to touch the band saw blade by hand or take the stuck or cut workpiece in the sawing processing area of the sawing machine. A kind of
4.8 the saw blade breaks during cutting. After replacing the new saw blade, the workpiece must be turned over and sawed from the beginning. When disassembling and replacing the saw blade, it must be confirmed that the machine tool has stopped running, and gloves must be worn when disassembling and assembling the saw blade. A kind of
4.9 it is strictly prohibited to saw and cut carbon rod powder combustible and explosive materials. A kind of
4.10 after the completion of the work, thoroughly clean the sawing machine, add lubricating oil and cut off the power supply.