1.5L 9.2T Plastic Blow Molding Machine 8 Cavity With 48mm Preform Heating Pitch

1.The built-in continuous rotating infeed system effectively reduces the space occupied. The consistency of preform position

streamlines the process.

2. 48mm pitched, more preforms are uninterruptedly heated within the same distance, which improves the efficiency and energy

saving (energy saving can be up to 40%).

3. The thermostatic heating system ensure that the heating temperature of each preform surface and internal is uniform.Hinged

oven holders make it easy for the operators to change infrared tubes and do maintenance.

The application of the full closed-loop voltage regulator in preform heating system:(RiBo company is the first

manufacturer of linear PET blow moulding machine who has this technology in China )

The temperature of the heating ovens are controlled by the full closed-loop voltage regulator (with feedback) which

independently developed by RiBo company. The controller detects and adjusts the output voltage (set value) at the scanning

frequency of 100 times per second, so as to achieve the effect of evenly voltage output and solve the problem of unstable

heating effect caused by the heat fluctuation of heating element (lamps) due to the voltage fluctuation of the power supply. In

addition, the closed-loop control system interacts and cooperates with the original heating ovens’ constant temperature control

system, greatly improving the heating temperature fluctuation caused by environmental temperature change. By application of

the above technology in the bottle blowing machine, the heating uniformity and stability of each preform tend to be completely

consistent, which finally ensures the stability and uniformity of the bottle blowing effect of each cavity. This closed-loop unit has

further improved the overall performance of the bottle blowing equipment.

4. The perform transfer system with grippers and the variable pitch system are both driven by the servo motors to ensure high

speed and accurate preform handling between the two mechanism.

5. The Servo driven the molding mechanism, triggering off the linkage to the bottom mold. The application of high speed

precision blowing valve unit helps to make high capacity.

6. The cooling system for the preform neck is equipped to ensure the preform neck does not deform during heating and

blowing.

7. The high pressure blowing system is equipped with the air recycling device which may reduce the air consumption to achieve

the energy-efficient and environmental safe.

8. Being highly intelligent, the machine is equipped with the units of preform temperature detection, leaking bottle detection and

rejection as well as jammed air conveyor detection, ect, which ensures the machine work efficiently and stably.

9. Operation on the touch screen is simple and easy.