Product Series

MD type electric wire rope hoist is a small-size lifting equipment,it could be installed many type cranes,such as overhead crane,gantry crane,jib crane,and it can be mounted on single-beam.Through slight modification,electric wire rope hoist can be used as a winch.So, it has a wide usage. MD type wire rope electric travelling hoist is a necessary lifting equipment in order to improving working conditions,which has the advantages of raising working efficiency and reducing manpower consumption.

Generally,MD type hoist has two speeds:normal speed and low speed.When providing low speed,It can meet the requirements of precision loading and unloading, sand box clamping, machine tool maintenance and other fine operations. Therefore, compared with the CD single-speed wire rope hoist, the MD type hoist is more widely used.

 

Special instructions: Wire rope hoists cannot use single phase. Therefore, when customizing, it is necessary to indicate whether single phase is used. If it is, chain hoists are recommended.

 

Application:

MD type electric wire rope hoist could be widely used in factory, workshop, cargo storage,
mines, harbour,warehouses and shops.

Drive mechanism:

Like the CD type electric hoist, the MD type electric hoist also uses a conical rotor motor, the difference is that it is driven by a normal and slow double motor. That is to say, ZDS1 type double motor is used, which is composed of two motors with different powers (that is, two motors whose power decreases according to a constant speed ratio) ZD1 type and ZDM1 type, which are connected by a gear transmission device. When the power supply is connected to the slow-speed motor but not the normal-speed main motor, the toothed brake wheel of the main motor and the fan brake wheel are pressed together to form an output stage transmission gear, and the torque generated by the auxiliary motor passes through the shaft. The extension gear is transmitted to the output stage transmission gear of the main motor, and the slow speed is obtained by the output of the main motor shaft. When the power supply is connected to the normal speed main motor, the main motor generates an axial magnetic pulling force to overcome the brake spring force, so that the fan wheel and the toothed brake wheel of the main motor are disengaged, and the rotor of the main motor starts to run immediately, and the constant speed is obtained.

Product Configuration

 

Product Specification

 

Technical Parameters for MD1 Electric Wire Rope Hoist
Lifting capacity	Ton	0.25 or 0.5	1	2	3	5	10	16
Lifting speed	m/min	0.8/8	0.8/8	0.8/8	0.8/8	0.8/8	0.7/7	0.35/3.5
Lifting height	m	3/6 / 9	6/9/12/18/24/30				9/12/18/24/30
Running speed	m/min	20	20	20	20	20	20	20
Min. radius of curvature	m	0.8 or 1.5	1.5/2 / 2.5 / 3 /4 / 4.5 / 6 / 9					3.5 / 4 / 6
Power supply	V	380V 50Hz 3Phase,AC
Rail I-beam model	/	16-28b	16-28b	20a-32c	20a-32c	25a-45c	32b-63c	45a-63c

 

 

1. 1.5 years warranty when products leave the factory, or 18 months warranty after installation and commissioning in addition to the human damage factors.
2. Two years spare-parts provided for better maintenance.
3. Professional technical staffs provide installation, commissioning and training services.
4. Delivery with English user manual, parts manual, product certification and other relevant certificates.
5. Technical advisory for any time.

Q1. What's the information should I provide when inquiry?

More details or drawings, better. Lift capacity ? lift height ? power source or other specials you give us will be more appreciated ?

Q2.What makes you different from other manufacturers ?

We believe our service department has the experience and knowledge to safely service your overhead cranes,gantry cranes,port crane and hoists .We have trained service technicians who will be able to get your material handling equipment up and running ,and have been providing our customer’s an effective service solution .

Q3. Can this type work in hazardous environment?

Sure! We can customize for you, acid proof or explosion proof, no problem for that.

Q4. Can you provide the serious lifting tools?

Sure, we can provide any lift tools such as lift sling belt, lift clamp, grab, magnet or other specials as your requirement!

Q5. How can we install the crane?

Our senior engineer can be your side to do the installation guide service and training. Moreover, our best sales can visit your country.

Q6.The space of my workshop is limited, can the hoist ok for mine?

Thanks for your question. For low headroom workshop, we have the Special products. The detail dimension please consult our professional engineer.