APLCQ300 Vertical Centrifugal Degasser Holding High Treating Capacity Specialized In Processing Gas Cut Drilling Fluids

Brief of vertical centrifugal degasser

Vertical centrifugal degasser is equipment holding high treating capacity, high efficiency, compact, and easy to operate. The filtration screen and impeller are welded by S.S. It's holding a high ability to resist corrosion.

Vertical centrifugal degasser is a new type of degasser, specialized in processing gas cut drilling fluids. Normally it is installed after shale shaker and widely used in the various solids control system, and it is very important for recovering mud weight, stabilize mud viscosity performance, reduce drilling cost. Meantime it can be used as a big power blender. Its advantages are large capacity, high rate of degassing, less area required, low energy consumption, easy operation, and maintenance.

Specifications of APLCQ300 vertical centrifugal degasser

Aipu Centrifugal Degasser Working Principle

Via the rotating impeller, the degasser sucks the drilling fluid into the vessel. The fluids will stay at a level higher than the gas cut drilling fluid and then a cylindrical liquid layer with inverted cone shape space in the middle will be formed. Drilling fluid is discharged from discharge port along a tangent line. With the impeller rotating, bubble breaks, gas will be extracted from liquid, and finally accumulate in the cone shape space as the lower density. Pressurizing unit(similar to exhaust fan) will suck air through the narrow channel between the air distribution disk and air separation ring into the discharge cone, and then gas manifold, braided hose and pressurized device to pressuring unit, finally discharge the gas out through pressuring device with pressure.

Application of vertical centrifugal degasser

Vertical centrifugal degasser is an ideal equipment to separate gas after shale shaker and minimum mud tank space requirement to maximum mud tank clean mud storage capacity in whole solids control mud system. The centrifugal force is supplied by a suitable design of degasser and a mud feeding pump at the proper pressure.

Vertical centrifugal degasser provides an innovative and small footprint solution compares to the traditional vacuum degasser which is a larger footprint. It is using centrifugal force to separate gas instead of a conventional vacuum. We are one of the leading manufacturers for poor boy degasser, vacuum degasser, and centrifugal mud degasser.

Vertical centrifugal degasser is popular with more and more users. Since the compact design and its flow rate. Compared to other suppliers' degasser, AIPU provides high-quality products and services in detail. Such as drilling mud input and the vacuum pump design. Please feel free to contact us for more detail

Benefits of APLCQ300 Vertical Centrifugal Degasser

The material of impeller is stainless steel with highly anticorrosion.
Maximum water flow of 300 cubic meters per hour.
Accepts any drilling fluid weight or mud viscosity.
Simple operation,easy to maintenance.
No cleaning - drilling fluid flow removes sand and cuttings.
Customization to fit pit area is available.

Please check above technical specifications for your reference.  For any question or demand, just feel free to contact AIPU solids. You will get a professional proposal very soon.