HDD Drilling Mud Cleaner Spiral Separator Desander
Spiral Separator Desanders For Drilling Mud, HDD, Mining And Water-Well
A desander just like a desilter is a part of solid control equipment on drilling facilities. It is a hydrocylone whose primary function is to remove sand particles which have a grain size of 50 to 70 microns. The installation position of desander is on the top of the mud tank following the shale shaker and the degasser but before desilter. All solids that are not removed by a shale shaker are removed by the desander. Desanders do not have any moving parts hence the removal of sand and silt from the drilling fluid is done by the centrifugal force on the desander.
Desander and desilter are important equipment for drilling liquid-solid control. It is mainly used for the second phase purification of drilling liquid. It removes nocuous solid, stabilizes drilling liquid properties, and improves drilling efficiency. The hydrodynamic cyclone of the desander is made of wear-resistant cast iron. It is reliable, effective, and serves long. The content of sand after the desander is controlled below 0.15%. Built on API RP 13C, with the certificate of authority to use the official API monogram.
Specifications
| Model | APCS120/240/360 | APCS120/240-M | APCS240/360-D3 | APCS240/360-MG4 | |
| Capacity (m³/h) | 120/240/360 | 120/240 | 240/360 | 240/360 | |
| Desander Cone | 10" | ||||
| Cone Qty | 1 Pcs/2 Pcs/3 Pcs | ||||
| Working Pressure | 0.25-0.4Mpa | ||||
| Separation Point | 47-76 Microns | ||||
| Inlet | 6" | ||||
| Outlet | 8" | ||||
| Bottom Shaker | Model | N/A | Hunter Mini | Hunter D3 | Hunter MG4 |
| Vibration Mode | Linear Motion | ||||
| Vibrator Motor | 2×0.75Kw | 2×1.72Kw | 2×1.72Kw | ||
| G Force | ≤7.5G | ||||
| Deck Angle | 2° | -1 - +5° | |||
| Screen Area | 1.35㎡ | 2.27㎡ | 2.73㎡ | ||
| Screen Panel | 2 Pcs | 3 Pcs | 4 Pcs | ||
| Dimension (mm) |
2150×1000×1900 | 1680×1760×1850 | 2400×2000×2200 | 2640×2100×2200 | |
| Weight (Kg) |
450/500/550 | 1050/1140kg | 1800/1890 | 1900/1990 | |
Features:
- Polyurethane ( PU ) material or high-chromium cast iron to make desander cones for longer lifespan.
- Clamp type for easy maintenance.
- Compact design with a small footprint.
- Flexible options for 1, 2, or 3 pieces of 10" or 12" cones for different capacities.
- Flexible fast connections are available for user assembly.
Benefits:
- Design: Adopt ANSYS limited element analysis to optimize the structure.
- Material: Use Q235B from BAOSTEEL for the body, and High strength compound rubber material used to reduce shock.
- Vibration motor: Italy OLI /American Martin, or according to customer requirement.
- Electrical control system: Explosion-proof electrical control system with electrical components as ABB, Siemens, Schneider
- Treatment: Grinding, Abrasive blasting, Epoxy zinc-rich primer, Intermediate painting with epoxy micaceous iron, and Finish painting with polyurethane
- Hydrocyclone cone: Made of wearing-resist polyurethane and in the structure similar to design.
- Inlet and outlet: Fast joint connection.
Aipu's Desander is an economical and practical desanding device. It is used as the second stage of the solids control system, separates solid particles' next stage equipment.
Video:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.