High perfomance explosion proof jet mud mixer working at 0.25-0.4mpa pressure

Summary of jet mud mixer

Jet mud mixer is special equipment to prepare and increase the drillinf fluids weight by adding and mixing bentonite, change the fluid density, change the mud density, viscosity, and dehydration. The unit includes one centrifugal pump, one jet mixing hopper and one jet mixer that are installed in a base with pipe valves.

APSLH series jet mud hopper unit are welcomed by clients for good price and high performance. Also, we have short delivery and many models for you to choose from. Nowadays our jet mud mixer is widely used in oil and gas drilling, horizontal directional drilling, tunnel and microtunnelling, shield construction, etc.

Specification of APSLH series mud hopper unit

Jet mud mixer features and benefits

High mixing capacity. Put the drilling fluids material (bentonites, barite power ) and the corresponding chemical addtives (polymer) into circulation tank for increasing the total

Able to handle high back-pressure

Which is designed to be economical, simple, robust, reliable and wear-

APSLH mud hopper unit characterstics

Jet mud mixer can change the density, viscosity and water loss effectively, and also enhance material dispersion effect, improve the mixed liquid pressure head.

Sand pump and jet mixing hopper can either be combined or be installed separately, and they are connected by pipelines and valves. Seals adopt packing and mechanical double seal, with good sealing performance.

Single jet mud mixer is made up of one sand pump, one jet mixing hopper that are installed in a base with pipe valves. Duplex jet mud mixer is composed of two sand pumps and two jet mixing hoppers.

How to select  and what impact mud mixing hopper unit impact 

First we shoud confirm treating capacity we need. And for oil and gas drilling kindly suggest 150m³/h flow rate. Then confirm pump,neceddary pipelines and also can depends on suppler suggestion 

Mixing hopper hydraulic consumption should be as little as possible, otherwise the flow rate may decrease by too much

Distance between Venturi hopper and nozzle should be proper. The optimal distance should be 32~90mm

Output pressure should be designed properly. If the discharge port pressure is too high the flow rate of mixing pump will be lower than expected

The higher pressure at inlet port the higher flow rate of mixing hopper

The higher hopper mounted the lower mixing capacity

If you have any demand of mud mixing hopper unit ? Please contact AIPU Solids freely. Trust you will get the true cost effective solution at the best rate.