Oilfield Rig Wood Access Mats Pitch Coating Size Customizable

Oilfield drilling rig mats are made of steel-frame structures with excellent hard larch. The woodiness is harder than Red pine, with better water resistance. Standard model steel is used as the steel-frame, loading capacity and cushioning capacity could meet the request on the drilling sites, Rig ratting used ensured drilling operators can work normally under complex geographical conditions. So as to be qualified to replace the traditional concrete foundation. Different sizes can be manufactured by Aipu solids control according to the customers’ request.

Wood Mat Features

• AIPU's premium three-ply bolted access mats are constructed using 100% #2 Douglas Fir, solid top, solid core design.
• AIPU's fleet also includes high-quality traditional three-ply bolted mats that are constructed using fir, oak, or a combination of both with a grooved top, solid core design.

Rig matting board is usually made with wood and steel frame. Sometimes, the mating board can be rubber, polyurethane, or fiberglass material. The wood is Larch or Conifer Pine, and the steel frame is made of a high-quality hot rolled carbon steel beam. Steel beam can be H beam or I beam. Different sizes can be manufactured by Aipu solids control according to the customers’ request.

Oilfield drilling rig mats specifications

Wood Mat Advantages

Wood mats are a more durable, cost-effective option to steel-framed access matting and rig mats.
The carriage-bolted design makes wood mats durable and the most economical matting option.
Strad's Industrial Matting team is the most efficient crew for site set-ups and tear-downs.

Oilfield drilling rig mats standard

The executive code includes wooden materials, hot rolled steel beam, metal welding quality requirements, anti-corrosive wood, drilling site layout, drilling equipment basic specification, and so on

Suggested size including 5x2m, 3x2m, and 4x2m. 5x2m is suitable for the base. The steel beam should be I beam larger than 16# or an H beam larger than 175#. Wood material strength should be higher than 32.8MPa.

The wood beam on mats should be higher than the steel frame 10-20mm both upside and backside. Steel beam surface painting oil film thicks above 150microns. The welding quality should conform with GG/T12467.4 or equivalent

Oilfield drilling rig mats application

• Used as the equipment foundation for drilling rig, Triplex mud pumps, Mud tanks, Power rooms, SRC house, Oil tanks, Water tanks, in order to ensure the steadiness when the drilling equipment is placed at the drilling sites.
• Rig matting is suitable for all kinds of ground surfaces, especially for loose formation. Directly putting on the ground is available because of the large contact area, lower limits to the ground. When the ground loading capacity is≥06Mpa, and ground flatness ≤ 40mm, the rig matting can be working.
• It replaces the traditional concrete foundation, reducing the drilling costs, improving economic efficiency, and saving the land.

How to test and inspect oilfield drilling rig mats

Put the mattings on flat ground with strength loading over 0.15MPa. Then lay materials on the mats gradually last 10 minutes. During the whole, test check if any deformation or cracking on the rig mats.

The spot inspection is based on 40 panels per batch. Each batch mat should select 2 panels by chance. If any non-conformance happened, there should be another check on the 2 panels again. If still any non-conformance, we define this batch mats are not qualified.

We will deliver about 100 panels rig matting board to an African oilfield drilling site. End-user requests strictly on whole quality and inspection. They will despatch SGS people to inspect mats per their requirements and agreement

Aipu oilfield drilling rig mats advantages

The raw material. Including the steel and the wood. Selected strictly according to executive code.

Wood will be processed under the anti-corrosion procedure.

We do the inspection and all processes step by step to ensure users' high-performance products.

Painting the rig mats with famous brand marine coating oil, which is high anti-corrosive.

Custom-built size and design as per clients' demand.

Aipu can produce rig mattings according to clients' certain requirements.