24-432F Fiber Optic Pigtail Fanout With Good Repeatability And High Temperature Stability
12~432F Fiber Optic Pigtail Fanout
Fiber optic pigtails provide a fast way to make communication devices in the field. They are designed, manufactured and tested according to protocol and performance dictated by the industrial standards, which will meet your most stringent mechanical and performance specifications.
Features
- Low insertion loss
- High return loss
- Good repeatability
- High temperature stability
Cable Profile View
Cable Parameters
| Items | Specifications | |
| Fiber Count | 24~432F | |
| Colored Coating Fiber | Dimension | 250µm±15µm |
| Color | Blue,Orange,Green,Brown, | |
| Colored Coating Fiber wish Color Point | Dimension | 250µm±15µm |
| Color | Blue,Orange,Green,Brown, | |
| Fibers in One Tube | 12 fibers (24,48F) | |
| Loose Tube | Dimension | 1.95 mm±0.05mm (24, 48F) |
| Material | PBT | |
| Color | Blue,Orange,Green,Brown (24,48F) | |
| Central Strength Member | Diameter | 1.5mm (24, 48F) |
| Material | FRP | |
| Outer Jacket | Dimension | 9.8 mm±0.5mm (24, 48F) |
| Material | PE | |
| Color | Black | |
Mechanical and Environmental Characteristics
| Items | Unite | Specifications |
| Tension(Long Term) | N | 600 (24, 48F) 1000 (288,432F) |
| Tension(Short Term) | N | 1500 (24, 48F) 3000 (288,432F) |
| Crush(Long Term) | N/10cm | 300 |
| Crush(Short Term) | N/10cm | 1000 |
| Min. Bend Radius(Dynamic) | mm | 20D |
| Min. Bend Radius(Static) | mm | 10D |
| Installation Temperature | ℃ | -10～+50 |
| Operating Temperature | ℃ | -20～+60 |
| Storage Temperature | ℃ | -20～+60 |
Ferrule End Face Inspection Criteria
| Defects | Zone A (Area Near Core) ≤40um | Zone B (Cladding) 40~125um | Zone C (Coating) 125~250um |
| Scratch (width) | None | Light scratch (white): None | >3um: None |
| Dark scratch (black): None | |||
| Pits & Irremovable material (Diameter) | None | ≥2um: None | ≥10um: None |
| Chipping (Diameter) | None | ||
| Crack/dust/contamination | None | ||
| Epoxy ring | Width<2um, total length≤1/2 fiber diameter | ||
Ferrule End Face Geometry Parameters
| Parameters | UPC | APC |
| Radius of Curvature | 10~25mm | 5~12mm |
| Fiber Undercut or Protrusion | ≤ 100 nm | ≤ 100 nm |
| Apex Offset | ≤ 50 μm | ≤ 50 μm |
| Polishing Angle | 8 +/- 0.3 degree |
Our main products are:
Fiber Optic Cables,
Fiber Optical Splitters,
Fiber Optic Patch Cord,
Pigtails,WDM Modules,
Fiber Distribution Boxes,
Fiber Optic Sockets,
Optical Distribution Cabinets/Hubs,
Outdoor Telecom Cabinets,
Optical Distribution Frames,
Network Rack cabinets, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.