12~432F Fiber Optic Pigtail Fanout Low Insertion Loss High Return Loss Good Repeatability
12~432F Fiber Optic Pigtail Fanout
A fiber optic pigtail fanout refers to a cable assembly that splits out or fans out multiple individual fiber optic pigtails from a single cable. The number range you mentioned, 12~432F, indicates the potential fiber count or the number of individual fibers in the pigtail fanout assembly.
Features
- Low insertion loss
- High return loss
- Good repeatability
- High temperature stability
Cable Profile View
Cable Parameters
| Items | Specifications | |
| Fiber Count | 24~432F | |
| Colored Coating Fiber | Dimension | 250µm±15µm |
| Color | Blue,Orange,Green,Brown, | |
| Colored Coating Fiber wish Color Point | Dimension | 250µm±15µm |
| Color | Blue,Orange,Green,Brown, | |
| Fibers in One Tube | 12 fibers (24,48F) | |
| Loose Tube | Dimension | 1.95 mm±0.05mm (24, 48F) |
| Material | PBT | |
| Color | Blue,Orange,Green,Brown (24,48F) | |
| Central Strength Member | Diameter | 1.5mm (24, 48F) |
| Material | FRP | |
| Outer Jacket | Dimension | 9.8 mm±0.5mm (24, 48F) |
| Material | PE | |
| Color | Black | |
Mechanical and Environmental Characteristics
| Items | Unite | Specifications |
| Tension(Long Term) | N | 600 (24, 48F) 1000 (288,432F) |
| Tension(Short Term) | N | 1500 (24, 48F) 3000 (288,432F) |
| Crush(Long Term) | N/10cm | 300 |
| Crush(Short Term) | N/10cm | 1000 |
| Min. Bend Radius(Dynamic) | mm | 20D |
| Min. Bend Radius(Static) | mm | 10D |
| Installation Temperature | ℃ | -10～+50 |
| Operating Temperature | ℃ | -20～+60 |
| Storage Temperature | ℃ | -20～+60 |
Ferrule End Face Inspection Criteria
| Defects | Zone A (Area Near Core) ≤40um | Zone B (Cladding) 40~125um | Zone C (Coating) 125~250um |
| Scratch (width) | None | Light scratch (white): None | >3um: None |
| Dark scratch (black): None | |||
| Pits & Irremovable material (Diameter) | None | ≥2um: None | ≥10um: None |
| Chipping (Diameter) | None | ||
| Crack/dust/contamination | None | ||
| Epoxy ring | Width<2um, total length≤1/2 fiber diameter | ||
Ferrule End Face Geometry Parameters
| Parameters | UPC | APC |
| Radius of Curvature | 10~25mm | 5~12mm |
| Fiber Undercut or Protrusion | ≤ 100 nm | ≤ 100 nm |
| Apex Offset | ≤ 50 μm | ≤ 50 μm |
| Polishing Angle | 8 +/- 0.3 degree |
Our main products are:
Fiber Optic Cables,
Fiber Optical Splitters,
Fiber Optic Patch Cord,
Pigtails,WDM Modules,
Fiber Distribution Boxes,
Fiber Optic Sockets,
Optical Distribution Cabinets/Hubs,
Outdoor Telecom Cabinets,
Optical Distribution Frames,
Network Rack cabinets, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.