1.2x1.6mm Indoor Invisible Cable with Bending Insensitive Fiber and Flame-retardant TPU Sheath for FTTH Applications
Da-IIC-1.2x1.6mm Indoor Invisible Cable
DA-Indoor invisible cable uses bending insensitive fiber as optical communication medium, the cable is completed with a layer of hot melt adhesive coat.
Cable Construction
Cross Section
Features
l Small outer diameter, light weight, transparent
l Great bending performance
l Easy and efficient installation
l Suitable for most surface Installation
Application
l FTTH
l Indoor Cabling
Cable Specifications
|
Parameters |
Specifications |
|
|
Optical Fiber |
Type |
SM, G657B3 |
|
Fiber no. |
1 |
|
|
Outer Diameter (mm) |
1.2*1.6 |
|
|
Strength Member Material |
Bare Fiber |
|
|
Outer Sheath Material |
Flame-retardant TPU |
|
|
Cable Length (m) |
10, 15, 20, 25, 30, 40, 50 |
|
|
Cable Weight (kg/km) |
Approximately 6 |
|
|
Color |
Transparent |
|
|
Flamability |
Meets the vertical flame-retardant requirements of a single cable.Complies with the CPR Eca standard |
|
|
Torsion ( N ) |
10 |
|
|
Max. Tensile Strength (N) |
Short Term |
50 |
|
Long Term |
20 |
|
|
Max. Crush Resistance (N/100mm) |
Short Term |
500 |
|
Min. Bending Radius (mm) |
Dynamic |
20 |
|
Static |
10 |
|
|
Cable Attenuation (dB/km) |
At 1310nm |
≤0.37 |
|
At 1550nm |
≤0.24 |
|
|
Temperature Range(°C) |
-10 ~ +60 |
|
|
Min. Installation temperature |
-10°C |
|
|
Transport Temperature Range |
-10°C to +70°C |
|
|
Termination |
Dual-Ended SC/APC |
|
|
Working Humidity |
5%RH to 93%RH |
|
|
UV aging test |
ISO 4892-2 Requirement |
|
|
After 96H, the color matching between pristine and aging samples should be less than 12 (ΔE < 12) |
||
|
After 500H, the invisible cables on wooden boards, wallpapers, and latex paints should not fall off |
||
|
Damp and head aging test |
65°C, 95%RH, 500 hours |
|
|
After 96H, the color matching between pristine and aging samples should be less than 12 (ΔE < 12) |
||
|
After 500H, the invisible cables on wooden boards, wallpapers, and latex paints should not fall off |
||
CONNECTOR SPECIFICATIONS
|
Parameters |
Specification |
|
Item |
Connector 1 and connector 2 |
|
Type |
SC/APC |
|
Insertion loss |
≤0.3dB |
|
Average value of interchangeability (used for link budget) |
≤0.25dB |
|
Return Loss |
≥60dB |
|
Pull |
Load: 20N, 5N/s |
|
Duration: 60s |
|
|
Impact |
Drop height: 1.5m |
|
Number of Drops: 5 for each connector |
|
|
Static Side Load |
Load: 1N |
|
Duration: 1h |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.