Semi - Automatically Full Height Gate For Factory School

Quick Descirption of High Security Gates

Specification of Full-Height Gate

Turnstiles System Operation Principle
1) Turn on the power, 2 seconds later; the system enters into work mode; the arm can’t be turned.
2) After swipe legal card or code and fingerprint, Access control device send opening signal to control board.
3) The control board receives open signal, control indicator to green,6 solenoid open , The arm of rotation can be pushed to 90 degree or 120 degree.
4) After the passenger push rod and then rotation turn to 90 or 120 degree, the position sensor send close signal to control board, the solenoid lock immediately.
5) Full turnstiles will lock after 5 seconds if the passenger swipe card but do not pass.
 

Features of Full Height Turnstile

1. Damper buffer device
2. Standard signal input port, can be connected with most of the access control board, fingerprint device and scanner other equipment;
3. The turnstile has automatic reset function, if people swipe the authorized card, but don’t pass through within the settled time, it need to swipe card again for entry;
4. Card-reading Recording function
5. Automatic opening after emergency fire signal input
6. Anti following : prevent illegal passing
7. High light LED indicator , displaying passing status.
8. Normal open can be also controlled via external button or manual key unlock
9. Gate will automatically open when power failure(connect 24V battry)

Single Lane Full Height Turnstile Size Diagram

Packing of Single Channel Full Height Turnstile