T Slotted 900x600 Cast Iron Welding Table Top For Machine Floor Bed
Cast Iron Tee Slotted Table 2000 X 1000 MM Custom-Made
Standard: GB/T22095-2008
Specification: 200x200-3000x8000mm or customize
Surface: flat (accessories are available according to your requirement, like V, T, straight-shaped slots and tapped holes, long
holes, grid lines, etc)
Hardness of the working surface: HB160-240
Surface treatment: hand-scraped, finish-milling or ground finish
Foundry process: sand casting or centrifugal casting
Molding type: resin sand molding
Painting: primer and face paint
Surface coating: pickling oil and plastic-lined or covered with anticorrosion paint
Surface flatness: Master, Working, Reference
Precision grade: 0-3
Working temperature: (20±5)℃
Packaging: plywood box
Precision: According to the national standards measurement examination regulations execution,
respectively is 1,2,3, fine polish.
| Specification (mm) | Flatness tolerance (um) | |||
| Grade1 | Grade2 | Grade 3 | Finihs plane | |
| 400x400 | 12 | 24 | ||
| 600x400 | 14 | 28 | ||
| 800x500 | 16 | 32 | 80 | |
| 900x600 | 16 | 32 | 80 | |
| 1000x750 | 18 | 36 | 90 | |
| 1000x1000 | 20 | 39 | 96 | |
| 1500x1000 | 25 | 48 | 120 | |
| 2000x1000 | 26 | 52 | 129 | |
| 2000x1500 | 56 | 140 | ||
| 2000x2000 | 60 | 152 | 230 | |
| 2500x1500 | 68 | 168 | 248 | |
| 3000x1000 | 174 | 248 | ||
| 3000x2000 | 184 | 275 | ||
| 3000x3000 | 210 | 300 | ||
| 4000x1000 | 210 | 300 | ||
| 4000x2000 | 219 | 310 | ||
| 4000x3000 | 240 | 360 | ||
| 5000x2000 | 255 | 375 | ||
| 5000x3000 | 287 | 420 | ||
| 6000x2000 | 293 | 430 | ||
| 6000x3000 | 308 | 460 | ||
| 8000x2000 | 370 | 520 | ||
| 8000x3000 | 382 | 570 | ||
RFQ :
Q: How many identification items of surface plates include?
A: There are five identification items together about the surface plates: the appearance and surface quality, roughness of working
surface and sides, included angle of sides, contact point of scraping surface plates and the flatness of working surface.
Q: How to protect the cast iron surface plates from deformation?
A: In case of any deformation happen during the processing of lifting, must be sure the four wire ropes which steadily hoist the four sides of surface plate in same-length.
When installing, the cast iron adjustable mounts on every supporting pointes should be well adjusted in order to bear averaged force. Our professional specialists are in charge of debugging the surface plates until getting qualified precision grade.
When using, please put down carefully and it is not allowed to move the rough workpieces on surface plates in case of any
scratched, dented in places.
After using, please take down the workpieces in case that any deformation happens. When not in use, we need to clean the working surface, coat rust-proof oils, cover with rust-proof paper and package the surface plates with outer packing in order to protect the surface plates in well condition.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.