S32750 / F53 Super Duplex Stainless Steel 45 degree elbow long radius 25%Cr Pren ≥40.0
2507 (UNS S32750) 25% chromium duplex stainless steel

Production process: Cold push forming

Material: S32750 / F53 Super Duplex Stainless Steel

Size:

Outer diameter of seamless elbow: 1/2 "－20" (DN15－DN500)
Outer diameter of slotted elbow: 1/2 "－48" (DN15－DN1200)

Production standards: GB / T12459, GB / T13401, SH3408, SH3409; ASME / ANSI B16.9, B16.28,
ASTM A403, MSS SP-43; DIN 2605, DIN2609, DIN2615, DIN2616;
JIS B2311, JIS B2312, JIS B2313

Wall thickness: Sch5S-SchXXS

General attributes:

S32750 Super Duplex stainless steel pipe has strong strength and corrosion resistance, and is mainly used in chemical processing, petrochemical and subsea equipment. It has strong resistance to chloride corrosion, higher thermal conductivity and lower coefficient of thermal expansion. Higher chromium, molybdenum and nitrogen content it has a high resistance to pitting, crevice corrosion and general corrosion.

Its impact strength is also very high. The S32750 alloy is not suitable for use at temperatures higher than 570 ° C. If it is exposed to such an environment for a long time, its toughness will decrease. Its chemical composition is shown below

National standards:
ASTM / ASME: A240-UNS S32750
EURONORM: 1.4410-X2 Cr Ni MoN 25.7.4
AFNOR: Z3 CN 25.06 Az
DIN / EN 1.4410, ASME SA-240

Mechanical properties Tensile strength: σb≥730Mpa Elongation: δ≥15%

Typical working conditions :30% dilute sulfuric acid, below 60 ℃, annual corrosion rate <0.1mm
 

SHANGHAI ABOOM METAL PRODUCT CO.,LTD

Address:ROOM 412,NO.452 CHEFENG ROAD,

SongjiangDistrict , Shanghai ,201601,P.R.China