Alkali – resistant fiberglass sticky mesh tape for wall gap repairing material

Alkali – resistant fiberglass sticky mesh tape for wall gap repairing material, also called fiberglass self adheve tape or drywall joint tape. It's flexible fiberglass drywall tape, made of high quality fiberglass, designed for use with jointing compounds to reinforce and strengthen plasterboard joints and corners. Retains strength when wet, with tapered edges for invisible seams and strong crease in centre for an effective fold.It can protect corners in houses and buildings not to get a lot of wear and tear.

Product Characteristics:
-Material of grade-A quality fiberglass
-Good crack control and wrinkle control
-Strong center crease, easy for corner finishing
-Good extensibility, tensile strength and breaking strength
-Make surface rough on one side or two sides to stick well
-Laser perforation, or needle perforation, with good air permeability


How to Finish:
1. Firmly press joint compound into wallboard joints over an approximate 4" wide area.
2. Center Joint Paper Tape in compound, over hidden crack and embed tape into compound. Cover tape with a thin coat of compound. Remove excess.
3. Make sure nail heads are driven in at least 1/32". Apply joint compound to nail head indentations.
4. After bed coat compound is completely dry (at least 24 hours) apply another thin coat of compound and feather out to a 3"- 4" width on each side. Apply second coat to nail heads.
5. Allow the preceding coat to dry and apply another thin coat, feathering out to a total width of about 8" on each side. Apply final coat to nail heads.
6. When completely dry, at least 24 hours after final coat, sand smooth.
Finishing Inside Corners.Apply compound to both sides of corner. Crease tape and embed. Apply a thin coat on both sides of tape. When dry, apply a second coat to one side only. Let dry, then finish the other side. When dry, sand until smooth.

Finishing Outside Corners: Use broad knife to apply the joint compound over the corner bead flange for the outside corners. The first coat should be approximately 6" wide, and the second coat 6"- 10" wide applied on each side of corner.

Caution:
Apply Paper Joint Tape only at the recommended temperatures of the joint cement used. Store tape in closed cartons at normal room temperature in an enclosed, dry shelter.
Architectural Specifications: Meets ASTM #C475

Primary Competitive Advantages:
-About 7 years manufacturing experience
-Professional skill and equipments
-Quality guarantee, delivery on time
-Inspection report of product quality issued
-Control quality for customer if need be
-Inspect by the third party acceptable

Application

It is used for wall gap repairing

Advantage

1.  Good alkali resistance

2.  High tensile strength and resistance to deformation

3.  Excellent self-adhesion

4.  Good smoothness

5.  Convenient application in construction

 
Specifications

 
Feature

 
Packing

 
Business information:

1. How to produce

2. The characteristics

3. How to pack