No Contact Infrared Thermometer Medical Use With Data Retention Function

Instructions

Non-contact infrared thermometer. Take the forehead gun as an example:
1) Power on
2) Point the infrared detector part to the center of the forehead—above the center of the eyebrow and keep it

vertical. The measurement area must not be covered by hair. If there is sweat, it should be dried.
3) The body temperature is displayed on the screen, the value is recorded, and the temperature measurement is

completed.

Characteristic

1. Single-point laser aiming.
2. Intelligent USB power supply.
3. Secondary white backlight display (the meter will automatically turn on this function when USB is connected).
4. Current temperature plus MIN (minimum), MAX (maximum), DIF (temperature difference), AVG (average) temperature

display.
5. Emissivity is adjustable.
6. Trigger is locked.
7. Celsius / Fahrenheit selection.
8. Tripod installation.
9. One 9V battery.

Daily care

Dirt on the outside: Wipe the dirt with a clean, soft cloth and water, or wipe with a cotton swab and medical

alcohol. Wiping with medical alcohol can also have the effect of disinfection. Be careful not to add too much water

or alcohol to prevent damage to the product if it flows into the interior.
Internal dirt: The internal infrared detector is an important device. Do not touch or press with your fingers or

other objects, otherwise it will affect the accuracy of the measured value. When the infrared detector is found to

be dirty, wipe it with a cotton swab moistened with 95% absolute alcohol.