Alloy 1815 1.4361 F46 S30600 Reducing Pipe Tee
A403 F46 S30600 1.4361 alloy 1815 Stainless steel pipe tee equal or reducing pipe fittings ASME B16.9
"Zheheng steel" specializes in producing stainless steel equal tee, reducing tee, reducing pipe (eccentric, concentric), flanging, pipe cap, flange.This product strictly follows ASTM B16.9/B16.5,A403, DIN, JIS and other standards.The materials used are F46 ,S30600 ,1.4361 Alloy 1815 and other stainless steel materials.
Mechanical Properties
- Quantity
- Value
- Unit
- Young's modulus
- Tensile strength
- Elongation
- Fatigue
- Yield strength
- 200000 - 200000
- 650 - 880
- 8 - 25
- 275 - 275
- 350 - 550
- MPa
- MPa
- %
- MPa
- MPa
Physical Properties
- Quantity
- Value
- Unit
- Thermal expansion
- Thermal conductivity
- Specific heat
- Melting temperature
- Density
- Resistivity
- 10 - 10
- 25 - 25
- 460 - 460
- 1450 - 1510
- 7700 - 7700
- 0.55 - 0.55
- e-6/K
- W/m.K
- J/kg.K
- °C
- kg/m3
- Ohm.mm2/m
| size | 1/2"-36" sch10s -schxxs |
| Material | Stainless Steel: |
| 1.4361 F46 S30600 | |
| Nickel alloy Steel: | |
| C276,600,625,800,825,800H | |
| STANDARD | ASTM / JIS / DIN / BS / GB/GOST |
| TYPE | equal tee, reducing tee or according to drawing |
| APPLICATION | Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc |
| ODM&OEM | We can also produce according to material proviede or appointed by customer |
Dimensions of Straight Tees and Crosses
Chemical composition of 1.4361 F46 S30600 material
| C | Si | Mn | P | S | Cr | Ni |
| ≤ | ≤ | ≤ | ≤ | ≤ | ||
| 0.018 | 3.7-4.3 | 2 | 0.02 | 0.02 | 17.5-18.5 | 14-15.5 |
| Mo | Al | Cu | Nb | Ti | V | Ce |
| ≤0.2 | ≤0.5 | |||||
| N | Co | Pb | B | Other |
Why Choose US:
1.100% PMI,Spectro Chemical Aanlysis Test for Raw Material
2.100% Dimension & Visual Examination
3. Mechanical Properties Test Include Tension Test,Flaring Test (For Seamless tube/pipe fittings)/ Flange Test (For Welded Pipe & Tube fittings), Hardness Test ,Reversed Flattening Test
4.100% Hydrostatic Test or 100% NON-DESTRUCTIVE Test (ET or UT)
5.Radiographic Test for Welded Pipe (shall be accordance with specification,or shall be as agreed upon between the purchaser and vendor)
6.Straightness Test (optional)
7.Roughness Test (optional)
8.Intergranular Corrosion Test(optional)
9.Impact Test (optional)
10.Grain Size Determinations (optional)
NOTES : ALL THE TESTS AND INSPECTION RESULT NEED TO BE SHOWED IN REPORTS ACCORDING TO STANDARD AND SPECIFICATION.
Products show:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.