Backup Standby Diesel Generator Closed Cooling Water Circulation Lr4b3z-D Model
52kw 65kVA Yto Lr4b3z-D Super Silent Industrial Backup Generator
1. Powered by heavy duty industrial diesel engines
2. Radiator 40 or 50 degree max, fans are driven by belt, with safety guard.
3. 12/24DC start motor and storage battery.
4. Brushless, self-excited, IP22/23, insulation H alternator.
5. Absorber to reduce vibration.
6. Dry type air filter, fuel filter, oil filter.
7. Main line circuit breaker.
YTO Engine :
YTO (Jiangyan) Power Machinery Co., Ltd. is a subsidiary of China Yituo Group Co., Ltd., which is based on
Yangdong Co., Ltd. and has become the multi-cylinder small diesel production base with the largest variety,
the most complete specifications and the largest scale in China. One has the ability to produce 300,000
multi-cylinder diesel engines per year. There are 18 basic multi-cylinder diesel engines with cylinder bores
from 80-102mm, displacements from 1.3-3.9L, and power coverage of 10-105kW. With its powerful power,
reliable performance, economical and durable, low vibration and low noise, the diesel engine has become
the first choice for many customers .
| PRODUCT DESCRIPTION |
| Genset Model | BS-YT100 | |
| Rated Output (KW/KVA) | 80KW/100KVA | |
| Max Output (KW/KVA) | 88KW/110KVA | |
| Phase | 3 | |
| Power Factor (cos Ø) | 0.8 | |
| Frequency | 50HZ/1500RPM | |
| Rated Voltage (V) | 400V | |
| Rated Current (A) | 144A | |
| Silent Genset Dimensions (MM)--N.W(KGS) | 2300*1050*1200--1100KGS | |
| Engine | Model | LR4N5LP-D |
| Type | 4-cycle, compression ignition, Water cooling | |
| Cylinder Numbers | 4-cylinder in line | |
| Standby Power (KW) | 105KW | |
| Air intake type | Turbocharged with Aftercooler | |
| Displacement(L) | 5.32 | |
| Compression Ratio | 17:1 | |
| Firing order | 1-3-4-2 | |
| Starting Type | Electric starting | |
| Bore×Stroke (MM×MM) | 112x135 | |
| Engine Sound level | ≤ 113 dBA | |
| Test Conditions | Air temperature | 25 °C |
| Barometric pressure | 100kPa | |
| Relative humidity | 30% | |
| Air inlet Restriction at maximum power (nominal) | ≤ 5kPa | |
| Exhaust back pressure (nominal) | ≤ 6 kPa | |
| Cooling system | Total coolant capacity: (engine only) | 6litres |
| Maximum top tank temperature | 99 °C | |
| Thermostat operating range | 76~95 °C | |
| Lubrication system | Lubricating oil type | L-ECD 15W/40 |
| Lubricating oil capacity | 14 litres | |
| Lubricating oil temperature maximum to bearings | 115°C | |
|
Oil Pressure @ Idle Speed @ Governed Speed |
≥98kPa 294~490kPa |
|
|
Maximum engine operating angles Front up,front down/right side or left side |
20°/15° | |
| Fuel system | Fuel oil type | 0# or 10# |
| Type of injection system | Direct injection | |
| Fuel injection pump | PM pump | |
| Governor type | Electronic | |
| Electrical system | Alternator | 24volts with integral regulato |
| Starter motor | 24volts | |
| Alternator | Type | Copy Stamford-BS274C |
| Rated Output (KW/KVA) | 80KW/100KVA | |
| Max Output (KW/KVA) | 88KW/110KVA | |
| Power Factor (cos Ø) | 0.8 | |
| Excitation Mode |
single-bearing with SAE , Brushless synchronous , Three harmonic exciting |
|
| AVR Model | SX460 | |
| Insulation Class | H CLASS | |
| IP Level (PROTECTION) | IP23 | |
| FAQ |
Q: Do you offer OEM service?
A: Yes
Q : What is the difference between Prime power and Standby power ?
A : Prime power is 12hours continous power , one hour 10% over load in every 12 running hours is allowed .
Standby power is the limit value of maximum output for emergency use . Overloading is prohibited
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.But if your order with some special design,
then the delivery time is longer.
Q: What certificates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP
for Nigeria,CIQ for Egypt, SASO for Saudi Arabia, etc
Q:What is your MOQ?
A: Above 1pc
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.