100mm Electroplated Diamond Polishing Pads in Different Sizes

for Glass and Stone Surface Polishing

Name: Diamond Soft Polishing Disc / Diamond Soft Grinding Disc

Blade Modal No: RTR-DD-006

Bonded Type: Electroplated

Image blade size:100 x 20 x2 mm 

Electroplated diamond soft grinding plate / electroplated grinding plate has the advantages of good sharpness, fast grinding and long service life. It can be used for grinding stone, glass, ceramics, cemented carbide and other surfaces. It is a simple and easy-to-use diamond tool.

The specification is 100 mm in diameter. Other general specifications are 80mm and 125mm in diameter. Other large specifications can be customized, and the diameter can be 300mm.

Grit size: 60# 120# 200# 400#

Brief Introduction of Diamond Water Grinding Disc

Diamond water grinding disc, also known as diamond soft grinding disc, is a flexible processing tool made of diamond as abrasive and composite materials. The back side is glued with Velcro cloth, which is glued on the joint of the mill. With grinding, it can process stone, ceramics, glass, floor tiles and other materials with different shapes. It is suitable for stone polishing, line chamfering, etc. it has strong grinding force, good durability and luster. The whole process is divided into four stages: rough grinding, fine grinding, fine grinding and polishing.

Characteristic of Diamond Water Grinding Disc:

• Unique resin bond, strong grinding force;
• High polishing speed and high finish;
• High wear resistance and long service life;
• There is no scratch and color left on the stone after grinding and polishing (not easy to dye);
• Rough grinding and sharp；

Application scope: Cement concrete floor and terrazzo floor etc.

Instructions for use:  To use with water together.

Application: Surface polishing of stone, Glass, Ceramics , Cemented carbide and other material.

Specifications: 100cm * 20cm * 2mm (rough polishing)

Particle size: 60 120 200 400 Etc

More Specifications: can be produced according to customer requirements. 

More Pictures of Diamond Water Grinding Disc

Ordering instructions:

When you order for the first time, please provide the following parameters, so that we can help you choose the most suitable cutting wheel.

Specification and size: abrasive, particle size, binder, outer diameter, thickness, inner diameter, abrasive working layer width, substrate thickness, etc. purpose: workpiece name, cutting size, cutting material;

Service conditions of grooving and cutting: machine tool, grinding wheel speed, feed speed and cutting depth;

Dry and wet cutting requirements: cutting accuracy, chipping requirements, processing surface integrity, etc

Special requirements: whether the tool is assembled and used, whether the resin cutting wheel needs to conduct electricity, whether the outer circle of the cutting wheel has a water tank, the size and quantity of the water tank, whether there is a chip removal groove on the outer side of the cutting wheel base, etc.

Order Operating Procedure: