Practical Carbon Filter Respirator , Disposable Dust Mask For Personal Protective
Practical Carbon Filter Respirator , Disposable Dust Mask For Personal Protective
1 . Descriptions
FFP2V Dust Mask with two head-straps provides comfortable & secure seal,nose clip individually adjustable nose clip for excellent fit.
2 . Material of each layer
Outer layer : Protective pp spun-bonded non-woven
Middle layde : FFP2 melt blown filter(have filter efficiency level of 94%)
Inner layer : Shaped needle punched cotton
3 . Mask CE Quality Standards
| CE Standard for Disposable Respirators | |||
| EN: 149:2001 + A1:2009 | |||
| Distinguish | Filter Efficiency | Penetration | Resistant |
| FFP1 NR | ≧80% | < 20% | < 21mmH2O |
| FFP2 NR | ≧94% | < 5% | < 24mmH2O |
| FFP3 NR | ≧99% | < 1% | < 30mmH2O |
1 . Stardard : EN : 149 : 2001 + A1 : 2009
2 . Test Machine : TSI 8130
3 . Test Flow : 95Liters/Min
4 . Test Medium : NACL & DOP
- EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
- EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.
4 . How to use?
- Cup respirator in one hand with nosepiece at fingertips,allow headbands to hang freely below hand.
- Hold respirator under chin,with nose piece up
- Locate the upper strap across the crown of the head and the lower strap below the ears.
- Strap must not be twisted
- Using both hands,mould nose clip to the shape of the lower part of the nose to ensure a close fit and good seal.Pinching the nose clip using only one hand may result in less effective respirator peformance.
- The seal of the respirator on the face should be fit-checked before entering the workplace.
- If the user feels the bottom strap is too loose and it is not possible to achieve a satisfactory fit of the mask a knot can be tied in the strap.
5. ADVANTAGES FOR SAFETY DUST MASK
* Meet NIOSH & CE standards.
* OEM and ODM
* Made of multi-layered nonpoisonous, non-allergic, non-stimulating materials..
* Very low resistance to breathing,free from foreign smell,without any stimulating feeling.
* Use ultrasonic welding technology, adapts for high-humidity and fuggy sites,specially good for manual workers.
* Adjustable nosepiece, ensures comfortable wearing.
* Static dealt filter lays, can soundly obstruct low-toxicity gas,filter orangic gas,sour odor and fine dust.
* Functions:anti dust.
* Application: Widely used in Buildings, Mining , Weaving, Polishing, Pharmacy, Hardware, Cement, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.