Lightweight Activated Carbon Dust Mask Anti Odors With Exhalation Valve

1 . Descriptions 

The Dust Mask is light and comfortable. The internal nosepiece is made of velvet/sponge double-layer. There are no exposed metal components; the external nosepiece used to adjust the mask on the face is metal coated. Structure and materials are long lasting and avoid the collapse in humid environments.

2 . Material of each layer

1st layer : Protective pp spun-bonded non-woven 

2nd layer : Active carbon filter(MX-3006)

3rd layde : FFP1 melt blown filter(have filter efficiency level of 80%)

4th layer : Shaped needle punched cotton

3. Advantages

COMFORTABLE&SOFT
4 layers virgin non woven fabric,45g hot air makes mask soft and puffy ,comfortable to touch skin, carbon layer is anti odors.

3D MODEL L ING
Three- Dimentional,imitate the shape of nose and mouth,perfectly wrapping people's mouth and nose.

THE VALVE'S WORKING PRINCIPLE
it is close when inhale,so outside particles couldn't flow in.It is open when exhale to wipe out the air emissions and help breath easily.

NOSE CLIP&NOSE FOAM
Nose foam prevents leakage and provide twice protection. Nose foam is made of sponge.It is comfortable to settle nose foam on nose bridge.

4. Certification

This product has been tested according to the following European Standard:

• EN149: 2001 +A1: 2009. Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking.It complies with European Regulation (EU) 2016/425 on Personal Protective Equipment (PPE).Category III.
• EU type examination certificate (module B) issued by BSI , notified body n°0086.The PPE is subject to the conformity assessment procedure based on internal production control plus supervised product checks at random intervals (Module C2) set out in Annex VII under surveillance of BSI , notified body n°0086.

5 . FAQ

Q: Can you provide free samples?

A: All samples are provided freely, it will takes3-5 days to prepare the samples.

Q: How does your factory control the quality?
A: All manufacturing are absolutely base on the pre-production samples. Meanwhile, we have a complete after-sales system.

Q: Could you embossed printing the logo on the face mask?
A: Yes, we can embossed printing the logo on the surface of face mask, OEM production is ok.