ASTM A213 TP310S Stainless Steel Seamless Heat Exchanger Pipe 6-101.6mm OD 0.5-8mm Wall Thickness

Austenitic Steel: TP304, TP304L, TP304H, TP304N, TP310S, TP316, TP316L, TP316Ti, TP316H, TP317, TP317L, TP321, TP321H, TP347, TP347H, 904L

Duplex Steel: S32101, S32205, S31803, S32304, S32750, S32760

Others: TP405, TP409, TP410, TP430, TP439

1.4301, 1.4307, 1.4948, 1.4541, 1.4878, 1.4550, 1.4401, 1.4404, 1.4571, 1.4438, 1.4841, 1.4845, 1.4539, 1.4162, 1.4462, 1.4362, 1.4410, 1.4501

08Х17Т, 08Х13, 12Х13, 12Х17, 15Х25Т, 04Х18Н10, 08Х20Н14С2, 08Х18Н12Б, 10Х17Н13М2Т, 10Х23Н18, 08Х18Н10, 08Х18Н10Т, 08Х18Н12Т, 08Х17Н15М3Т, 12Х18Н10Т, 12Х18Н12Т, 12Х18Н9, 17Х18Н9, 08Х22Н6Т, 06ХН28МДТ

• Chemical Analysis: Performed according to required quality standards
• Destructive/Mechanical Testing: Tensile, Hardness, Flattening, Flare, Flange
• Reverse-bend and Re-flat tests: Full compliance with ASTM A-450 and A-530 norms
• Eddy Current Testing: Digital Flaw-mark Testing System for subsurface homogeneity detection
• Hydrostatic Testing: 100% testing per ASTM-A 450 norms, maximum pressure support 20Mpa/7s
• Air Under Pressure Test: Detection of air leakage evidence
• Visual Inspection: Thorough examination by trained staff after passivation

Solution Annealed & Pickled/Bright Annealed surface treatment for optimal corrosion resistance and performance.