The simplest screening is the mechanical simulation of binocular screening, and the rocking

screener is the mechanical simulation of this. It is currently most effective simulation of the

principles of manual screening (screening accuracy, efficiency, and screen life are 5-10 times

that of conventional circular screens). is suitable for all fine and ultra-fine powders and granular

materials, especially difficult-to-handle materials. The simplest screening is the mechanical

simulation of binocular, and the rocking screener is the mechanical simulation of this. It is

currently the most effective simulation of the principles of manual screening (screening

accuracy, efficiency and screen life are 5-10 times that of conventional circular screens).

It is suitable for all fine and ultra-fine powders and granular materials especially

difficult-to-handle materials.
 

 

 

1. The basic rotary motion mimics the human manual sieving action, with an adjustable

amplitude of 25-40mm a frequency of 120-360 times per minute;

2. The residence time of the material in the sieve can be adjusted by the radial tangential

angles of the sieve;

3. The horizontal and projectile rolling motion of the material on the screen surface makes the

material evenly distributed from the center to the of the screen surface. Thus, it spreads axially

with the rotary motion. The fine particles complete the entire sieving process;

4. The horizontal and verticalations increase as the particles move, and the particles near the

sieve holes are successfully separated. Larger particles are sent to the outlet, where a adjustable

guide controls the rate. This is another factor in controlling the material's residence time;

5. This process is repeated between each layer of the sieve.

 

 
1. The design is ingenious, which is conducive to extending the equipment's service life and

reducing operation and maintenance costs.

2. It operates at low frequency and small load, so the power system has a small impact on

the equipment and materials.

3. The equipment has a small volume, is lightweight, easy to install, convenient to maintain,

and consumes less power, with minimal noise pollution.

4. It has a large relative processing capacity high screening efficiency, and the screening

accuracy of the shaking screen is generally over 95%.

5. It has a fully enclosed structure with good sealing effect, there is no material dust pollution.

6. The discharge port can be adjusted at any position within a 360° circle, making it easy to

arrange process.

7. The screen is easy to replace and can meet the general material's dry and wet grading

requirements.

8. The cleaning device can be conveniently added the screen surface, effectively solving

the problem of screen surface blockage.
 

It is suitable for dry and wet screening, sieving and filtering recovery in industries related to

food, mining, casting, abrasives, building materials cement, chemicals, fertilizer, light industry,

papermaking, grain industry, salt industry, and grain, etc.