Vibrating Screen

Vibrating Screen is a special-typed and high precision screening machinery with high performance, low noise, fully-enclosed, no powder fly and continual working, which is used to screen many different kinds of materials including dry, wet and other mixed. The series machine can continually separate all size of granule and powder materials to meet the needs of different kinds of customers.

The operation steps of vibrating screen are as follows:

1. Check whether the springs and screws are loose before starting the machine; Whether the oil volume between the bearings meets the requirements; Whether the screen body and spring have cracks; Whether the triangular belt is worn or broken; Check whether the screen opening is clean and whether there is broken or blocked. Close the air door of the dust collector before starting the equipment.

2. When interlocking is started, the emergency switch can be closed after receiving the "pre start" signal, and the equipment will start with the system.

3. In case of non interlocking operation, the equipment can be started individually.

4. After the vibrating screen operates normally, open the air door of the fan.

5. Normal shutdown is conducted by the operation panel.

6. In case of non interlocking working system, press the stop button beside the machine to stop the machine after the materials in the screen are finished. After the machine is stopped, the accident switch shall be cut off.