2 Inch Wireline Pressure Control Equipment Quick Union Crossover
Quick Union Crossover Wireline Pressure Control Equipment ID 2 Inch
I.Introduction:
1. Align the union outer joint with the inner joint and screw on the union nut;
2. Use a hook wrench to tighten the union nut.
II.Maintenance:
Thread and sealing head shall be coated with lubricating grease and stored with thread protector.
The Quick Union Crossover mainly consists of a body, a union nut and an O-ring.
The main body is a pipe that can withstand high pressure.
One end of the pipe is a union joint and the other end is Quick Union Crossover.
Union nut is made of alloy steel with wrench hole, and can be screwed with hook wrench during installation.
III.The use of methods:
| Drawing No. | ID. | W.P |
| S**-01.00 | 3" | 5000psi |
| S**-02.00 | 4.06" | 5000psi |
| S**-03.00 | 3" | 5000psi |
| S**-04.00 | 3" | 5000psi |
| S**-05.00 | 5.125" | 5000psi |
More specifications can be customized Structure Features:
IV.Maintenance:
Thread and seal heads are greased and stored with guards on.
Welcome to contact us at any time.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.