GMP approved High Speed mixing granulator with sway granulator

Pharmaceutical High Speed Mixer Granulator With Sway Granulator GMP Approved

General intoduction

Work principle

The powder materials are fed into the mixing vessel through the dispensing system. Through rotation and push by the mixing paddle at the bottom, they first move under a fluidizing status and get sufficient mixing. Then the adhesive is injected through the pressure spray gun to turn the dry powders into wet and soft materials. Meanwhile, they are made into even wet granules under the double actions of the mixing paddle and the high-speed cutter on the side wall.

Features

1. Complete GMP model.

2. All contact parts made from Stainless Steel 316 with Non contact parts made from Stainless Steel 304.

3. MS structure is fully covered with Stainless Steel 304 covers/claddings.

4. All contact parts are mirror polished to 220 Grit and external surfaces to matt finish of 180 Grit.

5. Homogeneous binder distribution.

6. Short batch time and reduce cleaning time.

7. Maximize CIP effectiveness.

8. Air purge sealing system for main stirrer shaft and granulator shaft.

Technical parameters