Coolnet CNM 100-300kVA Three Phase Modular Online UPS with 10-30kVA Hot-Swappable Power Modules, N+1 Redundancy and LCD Monitoring for Data Centers
The CNM 100–300kVA selection combines online double-conversion power protection with hot-swappable power modules for data centers, telecommunications facilities, and industrial control rooms. Select the cabinet capacity and module rating together, then reserve sufficient module capacity for the required redundancy level.
| System Model | System Capacity | Power Module | Module Rating |
|---|---|---|---|
| CNM-100/10 | 100kVA | HM10 | 10kVA |
| CNM-150/15 | 150kVA | HM15 | 15kVA |
| CNM-200/20 | 200kVA | HM20 | 20kVA |
| CNM-250/25 | 250kVA | HM25 | 25kVA |
| CNM-300/30 | 300kVA | HM30 | 30kVA |
System capacity and individual module rating are different specifications. Product images show representative CNM cabinet configurations; the cabinet layout and installed modules depend on the selected configuration.
- Online double-conversion topology with pure sine wave output.
- Hot-swappable power modules and monitoring/communication modules support service by qualified technicians.
- Configurable N+1 to N+X redundancy, subject to installed modules and connected load.
- Capacity can be expanded within the selected cabinet rating by adding compatible power modules.
- LCD and LED status display with a color touch screen for operating information.
- RS232, RS485, and SNMP communication support, plus EPO and generator interfaces.
| Input and Output Connection | Three-phase five-wire system |
|---|---|
| Rated Input/Output Voltage | 380/400/415VAC |
| Rated Frequency | 50/60Hz |
| Input Frequency Range | 40–70Hz |
| Output Voltage Accuracy | ±1% |
| Output Power Factor | 1.0 |
| Mains-Mode and Battery-Mode Efficiency | ≥96% |
| ECO-Mode Efficiency | ≥98% |
| Enclosure Protection | IP20; IP21 optional |
| Operating Temperature | −10°C to 40°C |
| Relative Humidity | 0–95%, non-condensing |
Before ordering, confirm the load in kW and kVA, supply voltage, redundancy target, battery backup duration, and installation conditions. Battery capacity and runtime are project-specific. Cabinet dimensions, installed module quantity, protection options, and communications configuration should be confirmed in the final quotation.
It identifies a 200kVA system using HM20 power modules rated at 20kVA each. The number of installed modules must be selected for the actual load and redundancy requirement.
Redundant capacity must be reserved. The usable protected load depends on the installed module capacity and the number of spare modules required by the design.
The series supports hot-swappable modules. Replacement must follow the manufacturer service procedure and be performed by qualified personnel with adequate remaining capacity and the required safety controls.
Runtime depends on load, battery capacity, and battery condition. Provide the required runtime and load profile so the battery configuration can be selected for the project.
No. The listed CNM systems use three-phase five-wire input and output at rated voltages of 380/400/415VAC.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.