Home ductless positive controlled indoor air quality energy recovery ventilator​

Ductless Energy Recovery Ventilator

The Wall Mounted Energy Recovery Ventilator allows for efficient fresh air ventilation in situations where ducted units cannot be used. The ERV can be located anywhere on an external wall and is designed for simple installation. 

Features

• Remote Indoor Air Value Monitoring
• No need to install convenient pipeline, low use cost
• Hyper silence does not affect sleep
• Cold heat recovery system, keep indoor temperature.
• Multi purify and high efficiency HEPA filter can remove efficiently and quickly. PM2.5, formaldehyde, dust and so on.

► SPECIFICATION

► SIZE

► ADVANTAGE

★ PM2.5 removal effect diagram

solubility

minute            10      20      30       40      50       60     minute         10       20      30       40       50       60

When the machine is started for 1 hour, PM2.5 decreases by about 25 ug / m³, which is the high quality air standard,

formaldehyde drops to about 0.3 mg / m³

★ Efficient filtration

Primary filter

Large filtration area and large dust capacity

The spreading area of primary filter is about 3 m³,It can filter large particles,

block mosquitoes, hair, etc.

Characteristic:

The primary filter is made of fiber cotton,It has the characteristics of large filtering area, large dust capacity, low wind speed and low resistance. The service life of the follow-up filter screen depends on this layer.

Medium efficiency filter

More than 97% of PM2.5 was filtered at one time

High efficiency filter

H13 medical grade filter screen, single filtration 99.95% PM2.5

Characteristic:

PTFE composite filter element is adopted,compared with the traditional glass fiber, PTFE filter paper will not emit chemical gas

The spreading area of primary filter is about 30 m^3,depending on the service environment, it is generally replaced within 1-2 years.