Waterproof Double Sided Thermal Adhesive Tape 0.15mm - 0.5mm For Bonding Chips
Waterproof Double Sided Thermal Adhesive Tape For Bonding Chips
|
Long-term temperature resistance |
120℃ |
|
Short-term temperature resistance |
180℃ |
|
Thickness |
0.15mm/0.2mm/0.3mm/0.5mm |
|
Material |
Acrylic polymer + organic silicone |
|
Color |
blue film white glue |
|
application |
electronics, led lighting industry and led TV field. |
| Product Keywords |
thermal conductive tape,thermal conductive double sided tape,thermal conductive tape for led
|
High tacky thermal conductive PSA.
Only pressure is needed to form an excellent bond and thermal interface.
The performance of thermal conductivity, insulation, buffer and high tacky make it as the best choice for electronic application.
Flexible and conformable. Ideal for uneven surfaces.
Stable and economical with different thicknesses and constructions.
Introduction: Thermally conductive double-sided adhesive is made of acrylic polymer filled with thermally conductive ceramic powder and compounded with organic silicone adhesive.
This product has the characteristics of high thermal conductivity and insulation, and is soft, compressible, conformable and strong. Its thermal conductivity is high and stable, especially for electronic products to conduct heat and heat dissipation
Used in electronics, led lighting industry and led TV field.
For the bonding of chips, flexible circuit boards and high-power transistors and heat sinks or other cooling devices in other manufacturing industries such as electronic appliances, led lighting, hardware industry, printing industry, etc.
Q:What’s the thermal conductivity test method given on the data sheet?
A: All the data in the sheet are tested out by the third party. ASTM D5470 is utilized to test the thermal conductivity.
Q: Are thermal pads reworkable?
A: It’s depend on the application and the pad being used. Thermal pads have been reused before, however,it’s up to the judgment of product designer, to see whether the pads could withstand reuse.
Q:Will the heat make the thermal pads softer?
A: ShoreC 20~80 ,there is no significant change in the hardness of thermal pads, as gap filler.
Q: What’s the tolerance for the thickness?
A :Normally ±0.1mm.
Q: Can the thermal pads be with fiberglass?
A: YES, we could have thermal pads with fiberglass center to improve customer specific requirements for the tensile strength.M-TS series has fiberglass on its surface, all other models will be made at your requirement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.