Black 1.6w/M.K PA6 PA6 Graphite Granules Graphene Material
Specifications
PA6 (polyamide 6) is translucent or opaque crystalline polymer with a specific gravity of 1.12-1.14. It has the characteristics of thermoplastic, light weight, good toughness, good chemical resistance and durability. Widely used in automotive parts, mechanical parts, electrical and electronic products, engineering accessories and other products.
1,Good wear resistance, excellent self-lubricating good heat resistance and chemical medicine resistance good oil resistance, high mechanical strength, good mechanical properties at low temperature good self-extinguishing property. well machine shaping. but high water absorption. high contracted percentage. not good dimension stability
2,Improve water absorption, dimension stability. heat resistance and freeze resistancebe base on the excellent intrinsic property, it has higher impact strength than pure nylon
3,Good mechanical property. good electrical property, good dimension Stability, good arc resistance, good dyeing property, less toxicity property, good heat resistance, not yield corrosion gas, non-volatilization, non-precipitation and permanent effect of flame retarded
|
FEATURES |
|
● Thermal Conductive
● Outstanding surface
● Halogen free Flame retardant |
|
APPLICATIONS |
|
● Injection molding
● Thermal Conductive parts, eg. LED parts |
Physical Properties
|
Properties |
Standards |
Conditions |
S.I.Units |
Typical Value |
| Mechanical properties | ||||
| Tensile Strength | ISO 527 | / | MPa | 65 |
| Tensile Elongation | ISO 527 | / | % | 10 |
| Flexural Strength | ISO 178 | / | MPa | 80 |
|
IZOD Notched Impact Strength |
ISO 179 | 11KJ | KJ/M2 | 2.1 |
| Rockwell Hardness | Shore D | / | ℃ | 91 |
| Thermal properties | ||||
| HDT | ASTM D648 | 0.45 MPa | ℃ | / |
| Flammability | UL-94 | 1.6mm | / | V0 |
| Rheological properties | ||||
| MFR | ISO 1183 | 235℃, 2.16kg | g/10min | 4.3 |
| Molding Shrinkage | ISO 2577 | 23℃, 30min | ‰ | 5~7 |
| Electrical properties | ||||
| Electric Strength | IEC 60243-1 | / | KV/mm | / |
| Volume resistivity | ASTM D257 | / | Ω.cm | / |
| Other properties | ||||
| Thermal Conductivity | ASTME1461 | Through-plane | W/m.K | 1.6 |
| Thermal Conductivity | ASTME1461 | In-plane | W/m.K | 6.2 |
| Specific Gravity | ISO 1183 | 23℃ | g/cm3 | 1.4 |
| Moisture Content | ASTMD570 | 23℃,50%RH | ﹪ | 0.18 |
Application
Packing & Shipping
Check below for more information on placing an order
|
1. Inquiry-Professional quotation. |
|||||||||
|
2. Confirm the price, lead time, products, payment term etc. |
|||||||||
|
3. Our sales send the Proforma Invoice with HENGQIU seal. |
|||||||||
|
4. Customer make the payment for deposit and send us Bank receipt. |
|||||||||
|
5.Initial Production Stage-Inform the clients that we have got the payment, And will make the samples according to your request, send you photos and catalogues or Samples to get your approval. After approval, we inform that we will arrange the production & inform the estimated time. |
|||||||||
|
6. Middle Production-send photos and catalogues to show the production line which you can see your products in . Confirm the estimated delivery time again. |
|||||||||
|
7. End Production-Mass production products photos, catalogues and samples will send to you for approval. You can also arrange the third party Inspection. |
|||||||||
|
8. Clients make payment for balance and HENGQIU Ship the goods .Also can accept payment term-Balance against B/L Copy Or L/C payment Term. Inform the tracking number and check the status for clients. |
|||||||||
|
9. Order can be say finish when you receive the goods and satisfy with them . |
|||||||||
|
10. Feedback to HENGQIU about Quality, Service, Market Feedback & Suggestion. And we can do better. |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.